User's Manual
170 Settings
Note
• Pairing can only be done with a headset or a hands
free car kit.
Pairing Searched Devices
1. Perform steps 1 to 4 in “Selecting Infrared
Interface” on page 169.
2. Press a or b to highlight “Paired Devices”, then
press or or A [Select] to select.
3. Press a or b to highlight the desired device, then
press A [Options].
4. Press a or b to highlight “Activate”, then press
to select.
Note
• Incoming calls can be answered with the headset or
hands free car kit whilst devices are paired.
Use the keys on either device to answer or end calls.
• To rename a device, press a or b to highlight
“Assign Nickname” in step 2 instead, then press
or A [Select] to select. Rename the device, then
press
A
[OK].
• To clear one or all device names from the Paired
Devices list, press a or b to highlight “Delete” or
“Delete All”, then press to select.
Then press A [Yes] or C [No].
Disconnecting Paired Devices
1. Press the switch on the paired device.
2. Perform steps 1 to 2 in “Selecting Bluetooth
Interface”.
3. Press a or b to highlight “Off”, then press to
select.
Formatting SD/MMC Cards
1. Perform steps 1 to 3 in “Selecting Infrared
Interface” on page 169.
2. Press a or b to highlight “SD Card”, then press
or A [Select] to select.
3. Press a or b to highlight “Format”, then press
to select.
A confirmation message is displayed.
4. Press A [Yes].
When formatting is complete, a message is
displayed.
5. Press A [OK].
Note
• If the card is locked, you will be requested to unlock
it and then perform the aforementioned steps once
again.
• If cards are damaged, they cannot be formatted.