TCADH3669XHZZPP MODEL UX-K02 t se d n a sH lesANUAL d r o z C TION M 2.4GH A OPER Charge the battery for about 10 hours before initial use. Cargue la batería durante 10 horas aproximadamente antes del primer uso.
TCADH3669XHZZPP all.book Page 1 Wednesday, January 21, 2004 4:24 PM FCC regulatory information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
TCADH3669XHZZPP all.book Page 1 Wednesday, January 21, 2004 4:24 PM Introduction To use the UX-K02 cordless handset, you must have a SHARP UX-CD600 fax machine. English Thank you for purchasing a UX-K02 cordless handset. Accessories Operation manual Battery cover Battery pack AC adapter Cordless handset charger Frequency 2.4 GHz (2.405 to 2.475 GHz) Dimensions Width: 1.8" (46 mm) Depth: 1.7" (42 mm) Height: 7.1" (180 mm) (not including antenna) Weight Approx. 0.3 lbs.
TCADH3669XHZZPP all.book Page 2 Wednesday, January 21, 2004 4:24 PM Important safety information Do not disassemble this product or attempt any procedures not described in this manual. Refer all servicing to qualified service personnel. Do not use this product near water, or when you are wet. For example, do not use this product near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Take care not to spill any liquids on the product.
TCADH3669XHZZPP all.book Page 3 Wednesday, January 21, 2004 4:24 PM Connecting the Cordless Handset Charger Connect the AC adapter to the cordless handset charger. Place the cord in the holders. English 1 2 Plug the AC adapter into a standard 120 V AC outlet. Important: Never cover the charger and AC adapter with a blanket, cloth, or other material. Excessive heating may result, causing a fire.
TCADH3669XHZZPP all.book 3 Page 4 Wednesday, January 21, 2004 4:24 PM Place the cordless handset in the charger with the dial pad facing forward. • Important! The dial pad must face forward, or the battery will not charge. • While charging the first time, the display may show PLEASE REGISTER. Be sure to let the battery charge for 10 hours, and then register the cordless handset as explained on the following page.
TCADH3669XHZZPP all.book Page 5 Wednesday, January 21, 2004 4:24 PM Registering the Cordless Handset After the initial charging, the cordless handset display shows: English HANDSET? To use the cordless handset, you must first register it in the machine. During registration, the machine will assign the handset a number. 1 On the machine, hold down INTERCOM/ CONFERENCE until the display at right appears.
TCADH3669XHZZPP all.book Page 6 Wednesday, January 21, 2004 4:24 PM The machine is identified by the number “0”, and the cordless handset that was included with the machine is identified by the number “1”. Entering a Name for the Cordless Handset Enter a name for the cordless handset in the machine. ♦ The machine will transmit the name that you enter to your cordless handset. The name will appear in the cordless handset’s display.
TCADH3669XHZZPP 6 Page 7 Wednesday, January 21, 2004 4:24 PM Enter the name by pressing number keys for each letter as shown in the chart below. Up to 10 characters can be entered. Example: BILL = 22 444 555 555 G= N= A= H= O= V= B= I = P= W= C= J= Q= X= D= K= R= Y= E= L= S= Z= F= M= T= SPACE = U= English all.book ♦ To enter two letters in succession that require the same key, press after entering the first letter. ♦ To clear a mistake, press SPEAKER .
TCADH3669XHZZPP all.book Page 8 Wednesday, January 21, 2004 The cordless handset is now ready to be used! 4:24 PM For information on operating the cordless handset, see your UX-CD600 operation manual. Maintenance Replacing the Cordless Handset Battery Like any other battery, the rechargeable battery will eventually wear out. The battery can normally be used for about two years, although this will vary depending on the conditions of use.
TCADH3669XHZZPP all.book Page 9 Wednesday, January 21, 2004 4:24 PM Deleting (changing) the cordless handset name Follow the steps below if you need to delete the cordless handset name. If you wish to change the name, delete it and then enter a new name. Press FUNCTION once and twice on ENTRY MODE English the machine. Machine display: 2 Press once and 3 Press once. HS NAME SET 1=SET, 2=CLEAR 4 Press to select CLEAR. SELECT HS NO. ENTER (1 - 8) 5 6 once.
TCADH3669XHZZPP all.book Page 10 Wednesday, January 21, 2004 4:24 PM Deleting a cordless handset (using the cordless handset) If you wish to stop using a cordless handset, follow the steps below to delete it (cancel the registration in the machine). ♦ A cordless handset should normally be deleted using that cordless handset as explained below. Only use the machine to delete a cordless handset (as explained in the following section) if the cordless handset has failed and cannot be used.
TCADH3669XHZZPP all.book Page 11 Wednesday, January 21, 2004 4:24 PM Deleting a cordless handset (using the machine) Use this procedure to delete a cordless handset only when the cordless handset has failed and cannot be used. On the machine, hold down INTERCOM/ CONFERENCE until the display at right appears. Fax machine display: MODE SELECT 1: HS ENTRY English 1 MODE SELECT 2: HS DELETE 3 Press on the machine. On the machine, enter the number of the cordless handset that you wish to delete.
TCADH3669XHZZPP all.
TCADH3669XHZZPP all.book Page 1 Wednesday, January 21, 2004 4:24 PM Introduction To use the UX-K02 cordless handset, you must have a SHARP UX-CD600 fax machine. English Thank you for purchasing a UX-K02 cordless handset. Accessories Operation manual Battery cover Battery pack AC adapter Cordless handset charger Frequency 2.4 GHz (2.405 to 2.475 GHz) Dimensions Width: 1.8" (46 mm) Depth: 1.7" (42 mm) Height: 7.1" (180 mm) (not including antenna) Weight Approx. 0.3 lbs.
TCADH3669XHZZPP all.book Page 2 Wednesday, January 21, 2004 4:24 PM Important safety information Do not disassemble this product or attempt any procedures not described in this manual. Refer all servicing to qualified service personnel. Do not use this product near water, or when you are wet. For example, do not use this product near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Take care not to spill any liquids on the product.
TCADH3669XHZZPP all.book Page 3 Wednesday, January 21, 2004 4:24 PM Connecting the Cordless Handset Charger Connect the AC adapter to the cordless handset charger. Place the cord in the holders. English 1 2 Plug the AC adapter into a standard 120 V AC outlet. Important: Never cover the charger and AC adapter with a blanket, cloth, or other material. Excessive heating may result, causing a fire.
TCADH3669XHZZPP all.book 3 Page 4 Wednesday, January 21, 2004 4:24 PM Place the cordless handset in the charger with the dial pad facing forward. • Important! The dial pad must face forward, or the battery will not charge. • While charging the first time, the display may show PLEASE REGISTER. Be sure to let the battery charge for 10 hours, and then register the cordless handset as explained on the following page.
TCADH3669XHZZPP all.book Page 5 Wednesday, January 21, 2004 4:24 PM Registering the Cordless Handset After the initial charging, the cordless handset display shows: English HANDSET? To use the cordless handset, you must first register it in the machine. During registration, the machine will assign the handset a number. 1 On the machine, hold down INTERCOM/ CONFERENCE until the display at right appears.
TCADH3669XHZZPP all.book Page 6 Wednesday, January 21, 2004 4:24 PM The machine is identified by the number “0”, and the cordless handset that was included with the machine is identified by the number “1”. Entering a Name for the Cordless Handset Enter a name for the cordless handset in the machine. ♦ The machine will transmit the name that you enter to your cordless handset. The name will appear in the cordless handset’s display.
TCADH3669XHZZPP 6 Page 7 Wednesday, January 21, 2004 4:24 PM Enter the name by pressing number keys for each letter as shown in the chart below. Up to 10 characters can be entered. Example: BILL = 22 444 555 555 G= N= A= H= O= V= B= I = P= W= C= J= Q= X= D= K= R= Y= E= L= S= Z= F= M= T= SPACE = U= English all.book ♦ To enter two letters in succession that require the same key, press after entering the first letter. ♦ To clear a mistake, press SPEAKER .
TCADH3669XHZZPP all.book Page 8 Wednesday, January 21, 2004 The cordless handset is now ready to be used! 4:24 PM For information on operating the cordless handset, see your UX-CD600 operation manual. Maintenance Replacing the Cordless Handset Battery Like any other battery, the rechargeable battery will eventually wear out. The battery can normally be used for about two years, although this will vary depending on the conditions of use.
TCADH3669XHZZPP all.book Page 9 Wednesday, January 21, 2004 4:24 PM Deleting (changing) the cordless handset name Follow the steps below if you need to delete the cordless handset name. If you wish to change the name, delete it and then enter a new name. Press FUNCTION once and twice on ENTRY MODE English the machine. Machine display: 2 Press once and 3 Press once. HS NAME SET 1=SET, 2=CLEAR 4 Press to select CLEAR. SELECT HS NO. ENTER (1 - 8) 5 6 once.
TCADH3669XHZZPP all.book Page 10 Wednesday, January 21, 2004 4:24 PM Deleting a cordless handset (using the cordless handset) If you wish to stop using a cordless handset, follow the steps below to delete it (cancel the registration in the machine). ♦ A cordless handset should normally be deleted using that cordless handset as explained below. Only use the machine to delete a cordless handset (as explained in the following section) if the cordless handset has failed and cannot be used.
TCADH3669XHZZPP all.book Page 11 Wednesday, January 21, 2004 4:24 PM Deleting a cordless handset (using the machine) Use this procedure to delete a cordless handset only when the cordless handset has failed and cannot be used. 1 On the machine, hold down INTERCOM/ CONFERENCE until the display at right appears. Fax machine display: MODE SELECT 1: HS ENTRY MODE SELECT 2: HS DELETE 2 3 Press on the machine. On the machine, enter the number of the cordless handset that you wish to delete.
TCADH3669XHZZPP all.
TCADH3669XHZZPP all.
TCADH3669XHZZPP all.book Page 2 Wednesday, January 21, 2004 4:24 PM IMPORTANT SERVICE INFORMATION If a Problem Occurs Most operational questions can be answered by referring to this "Operation Manual" Also, for your convenience, you will find answers to most frequently asked questions on our website at www.sharpusa.com/, or by sending e-mail to faxsupport@sharpsec.com. Should you require further assistance, call 1-877-794-8675; a Customer Relations Specialist will assist you.
TCADH3669XHZZPP all.
TCADH3669XHZZPP all.
TCADH3669XHZZPP all.book Page 139 Wednesday, January 21, 2004 4:24 PM SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 http://www.sharpusa.com SHARP CORPORATION FOR YOUR RECORDS Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear side of the unit. Space is also provided for other relevant information.