User's Manual

Table Of Contents
81
Camera
Using the Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
To Enable or Disable the Optical Zoom
The optical zoom enables you to zoom the picture more clearly by the actual zooming action
of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the
ratio more than that, it is replaced by the digital zoom.
“Camera”
[Options]
“Advanced”
1. Select “Enable Opt Zoom”.
Select “Disable Opt Zoom” to disable.
Note
The default setting is “Enable Opt Zoom”. If you select “Disable Opt Zoom”, you can use
only the digital zoom function.
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a (or c/the side-up key) or b (or d/the
side-down key).