User's Manual

176
Settings
Assigning the Pictures
Pictures can be displayed when turning the power on or off, when receiving an incoming
call, or when operating the alarm.
Pictures taken with the digital camera or images downloaded from a WAP site can be used.
To Set Built-in Pictures
“Settings”
→ “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2. Select “Preset Animation” when you select “Power On” or “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select “Incoming Call” or
“Alarm” in step 1.
To Set My Pictures
“Settings”
→ “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2. Select “My Pictures”.
3. Select the desired picture.
4. After displaying the picture, press .
5. Specify the area you wish to display using the navigation keys.
Note
• Some pictures cannot be used because of their picture and data types.
• If the picture in My Pictures is already set, it is displayed in step 2. Press [Change] and
select the desired picture.
e_j350.book Page 176 Monday, October 25, 2004 6:33 PM