User's Manual
Table Of Contents
- Introduction
- Contents
- Your Phone
- Getting Started
- Navigating Functions
- Voice Call/Video Call Functions
- Entering Characters
- Using the Menu
- Contacts List
- Changing the Name Order
- Changing the List Displayed
- Selecting the Storage Memory
- Sorting the Contacts List Entries
- Add New Contact
- Viewing My Contact Details
- Copying Contacts List Entries between SIM Card and Handset
- Finding a Name
- Dialling from the Contacts List
- Editing Contacts List Entries
- Assigning a Ringtone or a Ring Video Clip to Each Entry
- Deleting Contacts List Entries
- Manage Category
- Contact Groups
- Memory Status
- Speed Dial List
- Sending a Contacts List Entry
- Receiving a Contacts List Entry
- Sending a Voice Clip Message or Video Clip Message Using an Address from the Contacts List
- Synchronising Contacts List Entries with those on the Internet
- Camera
- Messaging
- Vodafone live!
- Music
- My Items
- Entertainment
- Organiser & Tools
- SIM Application
- Settings
26 Voice Call/Video Call Functions
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not
wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone to
the caller of an incoming call letting them know that you
cannot answer the call.
In Call Menu (Video Call)
Muting the Microphone
1. During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1. During a video call, press [Options] and select “Switch
Images”.
Changing the Image of Yourself
1. During a video call, press [Options] and select “Camera
Picture”.
2. Select from “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”: The image through the sub camera is
displayed and sent to the party.
“External Camera”: The image through the camera is
displayed and sent to the party.
“Alternative Image”: The camera is turned off and the
image selected in “Alternative Image”
of “Video Call Settings” is used.
Using the Optical Zoom Function
The optical zoom enables you to zoom the picture more clearly by the
actual zooming action of the optical lens. The optical zoom is used up
to the [×2] zooming ratio. If the zoom exceeds [×2], the digital zoom
is used to further magnify.
1. During a video call, press [Options] and select “Enable Opt.
Zoom”.
The image is magnified.
Turning the Speakers On and Off
You can talk via the loudspeakers on the sides of the phone when it
is on.
1. During a video call, press [Options] and select “Loudspeaker
On”.
Note
• In a high-noise environment, you may not be able to continue a
call, or make a clear call. We recommend that you use the Stereo
Handsfree.
• With this option, there may be interruption if you increase the
earpiece volume. We recommend that you decrease the earpiece
volume or use the Stereo Handsfree.