User's Manual

Accessories
27
2. Cordless
Handset
will sound. Press (Valid.), enter
the desired time, and press
(Valid.).
The activation screen will appear.
Press (Yes) to activate the
alarm.
• RINGER TYPE: Select this to
change the ring tone used for the
alarm. Press (Valid.) and or
to select the desired ring tone.
Press (Volume) and or to
adjust the volume.
When finished, press (Valid.).
• ACTIVATE: Select this to activate
the alarm using the current time
setting. Press (Valid.). An
information screen will appear.
Press (Valid.) again.
• DEACTIVATE: Select this to
deactivate the alarm. Press
(Valid.). An information screen will
appear. Press (Valid.) again.
5 To exit the menu, press .
Follow the steps below to select timer
settings and activate the timer.
1 Press or until
“ACCESSORIES” appears and
press OK.
2 Press or to select “TIMER” and
press (Valid.).
3 To activate the timer without
changing settings, press
(Start). To change the settings,
press (Edit).
4 Press or to select the setting
below that you would like to
change.
• SET DURATION: Select this to set
the duration of time after which the
timer will sound. Press (Valid.),
enter the desired duration, and
press (Valid.).
Press (Return) to display the
timer activation screen, and press
(Start) to activate the timer.
• VIEW: Select this to specify whether
or not the timer count-down time is
shown in the display. Press
(Valid.). A screen will appear asking
you if you want to show the time.
Press (Yes) to show the time,
and then press (Return) to
display the timer activation screen.
Press (Start) to activate the
timer.
• RINGER TYPE: Select this to
change the ring tone used for the
Timer
The timer function is used to have the
cordless handset ring after a selected
duration of time elapses.
♦ When the set time elapses, the
cordless handset rings for 60
seconds. To stop timer ringing, press
(Stop).