User's Manual

20-21
Abridged English Manual
20
. PIN1 and PIN2 are 9999 by default; change as needed.
. Activate PIN Entry to require PIN1 (4 - 8 digits) entry each
time handset (USIM Card inserted) is turned on.
PIN1 Lock or PIN2 Lock is activated if PIN1 or PIN2 is
incorrectly entered three times consecutively. PUK
Code is required to cancel PIN Lock. For details,
contact SoftBank Customer Centre, General
Information (see P.20-50 ).
*USIM Personal Unblocking Key (PUK Code) unblocks a USIM
Card blocked after the wrong PIN has been entered three
consecutive times. Each USIM Card has a unique PUK Code.
Do not disclose it to unauthorised persons.
Handset Code, Centre Access Code and Network
Password are needed for handset use.
For details, contact SoftBank Customer Centre,
General Information (see P.20-50 ).
4-digit number ( 9999 by default) required to use or
change some handset functions. * appears as digits
are entered. If Handset code is incorrect! appears,
enter again.
4-digit number selected at initial subscription;
required to access Voicemail via landlines or
subscribe to fee-based information.
USIM PINs
PIN1 & PIN2
PIN1 Prevent unauthorised use of handset
PIN2 Required to clear Call Costs and to set Max Cost
PIN Lock & Cancellation (PUK Code*)
Note X . If PUK Code is incorrectly entered ten times
consecutively, USIM Card is locked and handset is
disabled. Write down PUK Code.
. For USIM Card unlocking procedures, call
SoftBank Customer Centre, General Information
(see P.20-50 ).
Security Codes
Handset Code
Centre Access Code
L280_insatsu.book 21 ページ ２００６年１２月２６日 火曜日 午後７時５１分