User's Manual

Settings 153
To Select a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
“Settings”
→ “Other Settings” tab → “Network
Settings” → “Select Network” → “Automatic”
To Select the Network Manually
“Settings”
→ “Other Settings” tab → “Network
Settings”
→ “Select Network” → “Manual”
1. Select the desired network.
To Add a New Network
“Settings”
→ “Other Settings” tab → “Network
Settings”
→ “Select Network” → “Add New
Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following
steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
To Edit the Preferred List
“Settings”
→ “Other Settings” tab → “Network
Settings”
→ “Select Network” → “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position,
“Add to end” to insert at the end or “Delete” to
delete.
To Set Flight Mode
When the Flight Mode is set to “On”, the phone cuts off
the network connections and stops searching for
available networks to connect. With this mode, you can
play games or music even when you fly.
“Settings”
→ “Other Settings” tab → “Network
Settings”
→ “Flight Mode”
1. Select “On” or “Off”.
Area Info
The Area Info is the message information that operators
send to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
(M 12-d-d -d-5-3)
(M 12-d-d-d-5-5)