dt20_E.book 30 ページ ２００７年１２月１２日 水曜日 午後２時３分 Component names and functions Before Using the Handset 1 2 b j k l m n o p 3 s c k r d 4 e 5 f g 6 7 8 9 a h i ※ Key illustrations are examples and may look different from actual keys. 30 e02_dt20_7e.
dt20_E.book 31 ページ ２００７年１２月１２日 水曜日 午後２時３分 1Earpiece Emits the other party’s voice. Listen to Record message/Voice memo using the earpiece. 3Main display (nP. 34) 4i-mode/Operation guidance key i (,) Press to use i-mode (nP. 172). Press to execute the functions of the operation guidance (nP. 33). Press for 1+ seconds to display the i-appli software list screen (nP. 235). 5Multi-guide key wt Move the cursor to select an item and execute or set (nP. 33).
dt20_E.book 32 ページ ２００７年１２月１２日 水曜日 午後２時３分 gPower/End key H Press for 2+ seconds to turn the power on/off (nP. 53). Use to end the function being used and return to stand-by display. Before Using the Handset hEco key y Press to use the Eco mode (Power saver) (nP. 119). Press for 1+ seconds to use the Private filter (nP. 128). pSub display (nP. 34) qCalled LED/Charging LED/Camera LED Flashes while receiving a call, etc (nP. 125). Stays lit while charging (nP. 49).
dt20_E.book 33 ページ ２００７年１２月１２日 水曜日 午後２時３分 How to open the FOMA terminal 3 4 When carrying, keeping the FOMA terminal closed as shown in the diagram for step 1 is recommended. 1 2 Rotate the display 90° to the right. Note Open carefully with both hands. Push the display back as far as it will go. ■ Cycloid position Set to the Cycloid position in stand-by or other screens so that 1Seg is automatically activated.
dt20_E.book 34 ページ ２００７年１２月１２日 水曜日 午後２時３分 ■ Operation guidance menu Before Using the Handset In the operation guidance, menus appear according to the used function and situation. The following table describes examples of the main operation guidance menus that appear. OK Sets the selected item. Submenu Displays the Submenu. Agree Checks selected image, music, etc. Back Returns to the previous screen. Play/Stop Plays/stops i-motion, music, etc. Full-scr Displays selected images, etc.
dt20_E.book 35 ページ ２００７年１２月１２日 水曜日 午後２時３分 1Signal status ]/a 6Overseas 3G network (nP. 440) Indication of the signal strength ] n o p Strong Weak 2Battery level/Charging (nP. 52) "/b {/k 3G network (Packet transmission not available) 7Shortcut menu (nP. 392) m Appears when the function can be added to the Shortcut menu 8i-mode mail/SMS/Area Mail received (nP. 209) Battery level Charging Battery icon can be changed (nP. 124). 3i-mode/Full Browser (nP. 172, P.
dt20_E.book 36 ページ ２００７年１２月１２日 水曜日 午後２時３分 dRecord message (nP. 76) ] Record message is set Before Using the Handset When there are messages, D to P appears, indicating the total number of both types of messages. When there are three Record messages (voice calls) and two Record messages (Videophone), k appears. eSilent (nP.
dt20_E.book 37 ページ ２００７年１２月１２日 水曜日 午後２時３分 qUSB mode (nP. 335) x Appears when FOMA card is malfunctioning or not inserted B/h Appears when a card other than the FOMA card is inserted sSelf mode (nP. 135) Self mode is set tPushTalk (nP. 88) During PushTalk transmission uIr exchange/External device J Data is communicated with another device using the Ir exchange function (nP. 341) Data is sent using the Ir remote control (nP.
dt20_E.
dt20_E.book 39 ページ Icon 4 G ２００７年１２月１２日 水曜日 Message 午後２時３分 Page Charge limit exceeded P. 396 Custom menu/Basic menu*2 P. 42 1 2 In stand-by, a stock icon appears/t. Select the stock icon/t. Move the pointer or double-tap the TOUCH CRUISER pad in the range where there is a logo, “TOUCH CRUISER”. Make the finger stand a little bit to operate easily. After the details are checked, the stock icon and message disappear.
dt20_E.book 40 ページ ２００７年１２月１２日 水曜日 午後２時３分 Before Using the Handset ■ Moving the pointer ■ Determining In the Custom menu or while i-mode or Full Browser is connected, move the pointer (L, M, K, etc.) up/down, left/right or diagonally to select an item. In some Custom menus, the pointer shape varies or the pointer is not supported. Move the pointer to the edge of the screen while i-mode or Full Browser is connected to show G, R/\, Z and scroll the screen to the direction of the arrow.
dt20_E.book 41 ページ ２００７年１２月１２日 水曜日 午後２時３分 Setting the TOUCH CRUISER pad Start menu ■ Setting whether to use the TOUCH CRUISER pad 2 In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Usage settings]. Select the setting/t. ■ Setting the pointer speed/scroll speed/double tap speed 1 Custom menu In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]. 2 Select an item/t. 3 Select the speed/t.
dt20_E.book 42 ページ ２００７年１２月１２日 水曜日 午後２時３分 ■ Switching the set start menu temporarily Before Using the Handset Switch the start menu temporarily. When the stand-by display reappears, the start menu returns to the one set in Menu priority. Use the Shortcut menu to retrieve saved functions quickly. Other functions can also be saved in the Shortcut menu (nP. 392). o Retrieving a function from each start menu For details on the available functions nP.
dt20_E.book 43 ページ ２００７年１２月１２日 水曜日 午後２時３分 When the handset color is “Silver White” When the handset color is “Black” or “Gold” (the screen of the handset color “Black”) Select a function on the upper part of the screen to show the menu of the selected function at the lower part of the screen.
dt20_E.book 44 ページ ２００７年１２月１２日 水曜日 午後２時３分 ■ Retrieving from the Basic menu Example: Retrieving [My picture(phone)] by entering function numbers to show still pictures in [Camera] Before Using the Handset For the , mark, use the TOUCH CRUISER pad to select an item. 911 Basic menu When [My picture(phone)] appears , 1 2 In stand-by, press $. Select a menu or item/t. In the details screen, select the function to start/t/ [Yes].
dt20_E.book 45 ページ ２００７年１２月１２日 水曜日 午後２時３分 ■ Removing FOMA card 1 Using a FOMA card Do not allow the FOMA card to fall when removing it. If a FOMA card is not inserted, transmission functions such as voice/Videophone calls, PushTalk transmission, i-mode, mail transmission and packet transmission are not available on the FOMA terminal. In addition, 1Seg cannot be watched.
dt20_E.book 46 ページ ２００７年１２月１２日 水曜日 午後２時３分 FOMA card restriction functions Before Using the Handset The FOMA card has built-in restriction functions as security functions for protecting personal data and files. When the FOMA card is inserted into the FOMA terminal and data or files are retrieved using any of the following methods or when an i-appli is running, FOMA card restriction functions are automatically set in the retrieved data or files.
dt20_E.book 47 ページ ２００７年１２月１２日 水曜日 午後２時３分 Note Differences in FOMA card functions Note the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal. Function FOMA card (blue) FOMA card (green/white) Before Using the Handset When one’s own FOMA card is replaced with another’s FOMA card, the data or files for which FOMA card restriction functions are set cannot be set as stand-by displays or ring tones.
dt20_E.book 48 ページ ２００７年１２月１２日 水曜日 午後２時３分 Inserting and removing the battery pack 3 Reattach the back cover (5). Position the back cover as shown in the illustration and then push the back cover and slide into place. Before Using the Handset Use the battery pack SH15 exclusive to the FOMA terminal. 5 Turn off the power, close the FOMA terminal, and hold it in your both hands before inserting or removing the battery pack.
dt20_E.book 49 ページ ２００７年１２月１２日 水曜日 午後２時３分 Charging the FOMA terminal ■ Estimated charge times and LED display The following figures are estimated times for charging an empty battery pack with the FOMA terminal turned off. FOMA AC Adapter 01/02 Approx. 120 min FOMA DC Adapter 01/02 Approx. 120 min Charging LED illuminates in red when charging and turn off when charging is completed. Check that the battery pack has been properly inserted when charging LED flashes red.
dt20_E.book 50 ページ ２００７年１２月１２日 水曜日 午後２時３分 Frequently recharging the battery when power is still remaining enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging. The battery pack cannot be charged by itself. If i-appli, Videophone, or 1Seg is used while charging for a long time, the service life of the battery pack may become shorter than estimated.
dt20_E.book 2 51 ページ ２００７年１２月１２日 水曜日 午後２時３分 Note Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the cover on the external connector terminal. May damage the cover. Do not place objects near the FOMA terminal when charging. The FOMA terminal may be damaged.
dt20_E.book 52 ページ ２００７年１２月１２日 水曜日 午後２時３分 Place the FOMA terminal as the figure shows (1), and push it in the direction of the arrow (2) until it clicks. Charging/Called LED Before Using the Handset 3 Connector (Face the side with the arrows down) Note When placing the FOMA terminal in the desktop holder, be careful that the strap is not caught in between the handset and the desktop holder.
dt20_E.book 53 ページ ２００７年１２月１２日 水曜日 午後２時３分 If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”. If the battery runs out ■ Turning the power off 1 Note If initial settings are not yet completed, the setting screen appears every time the power is turned on. If the FOMA card is not inserted, [Insert UIM] and a FOMA card error appear (nP. 37). When [Enter PIN1 code] appears, enter the PIN1 code (nP. 132).
dt20_E.book 54 ページ ２００７年１２月１２日 水曜日 午後２時３分 To switch the display language from English to Japanese: In the Custom menu, select [Settings]/[General settings]/[Select language]/[日本語]. Note Before Using the Handset If a FOMA card is inserted, settings are saved to the FOMA card as well. When the setting of the FOMA terminal handset and the setting of the inserted FOMA card are different, the setting in the FOMA card is prioritized.
dt20_E.book 55 ページ ２００７年１２月１２日 水曜日 午後２時３分 Note Notify caller ID When Auto time correction is set to [ON] Sending your own phone number to the other party Related Operations Change the time zone manually Display your number (caller ID) on the other party’s phone (display) when making a voice/Videophone call or transmission PushTalk. Handset number (caller ID) is important personal information. Be very careful about your caller ID setting.
dt20_E.book 56 ページ ２００７年１２月１２日 水曜日 午後２時３分 Setting up Notify caller ID/No caller ID when making a call Before Using the Handset Specifications made when making a call take priority over the method for setting in advance. 1 In stand-by, enter a phone number/C/[Caller ID setting]. 2 Select the setting. To notify caller ID: Select [Send own no.]. To not notify caller ID: Select [No caller ID]. To follow the Notify caller ID of the network service (nP. 55): Select [As NW setting].
