User's Manual

39
e02_dt20_7e.fm
[39/56]
Before Using the Handset
*1 When the 2in1 mode is set to [Dual mode], the number of Number
B also appears.
*2 The message that appears differs depending on the menu screen.
1
In stand-by, a stock icon appears/t.
2
Select the stock icon/t.
After the details are checked, the stock icon and message
disappear.
Use TOUCH CRUISER pad to perform the same operations as
those of Multi-guide key (e.g. selecting an item, moving the
cursor or scrolling the screen).
Move the pointer or double-tap the TOUCH CRUISER pad in the
range where there is a logo, “TOUCH CRUISER”.
Make the finger stand a little bit to operate easily.
4
Charge limit exceeded P. 396
G
Custom menu/Basic menu
*2
P. 4 2
Note
Stock icons do not appear while the i-motion set as stand-by is
played or the i-appli stand-by is being activated.
Icon Message Page
TOUCH CRUISER pad
Note
In the following cases (screens), the TOUCH CRUISER pad is not available.
However, when the Submenu appears, the pad can be operated.
 Stand-by  i-appli
 Dial input screen
 While making, receiving or during the voice call/Videophone
call/PushTalk, etc.
Operating range of
TOUCH CRUISER
pad
The pointer or cursor
moves in conjunction with
sliding of the finger
Double-tap the finger to
select
dt20_E.book 39 ページ ２００７年１２月１２日 水曜日 午後２時３分