User's Manual
40
e02_dt20_7e.fm
[40/56]
Before Using the Handset
■ Moving the pointer
In the Custom menu or while i-mode or Full
Browser is connected, move the pointer (L, M,
K, etc.) up/down, left/right or diagonally to select
an item.
In some Custom menus, the pointer shape
varies or the pointer is not supported.
Move the pointer to the edge of the screen
while i-mode or Full Browser is connected to
show
G
,
R
/
\
,
Z
and scroll the screen to the
direction of the arrow. If Link is set,
M
appears,
and double-tap to move to the linked page.
The pointer moving speed varies depending
on the finger sliding speed.
■ Moving the cursor
In the Basic menu or Submenu, move the cursor
up/down and left/right instead of using the
four-way key.
When there are multiple pages, move the
cursor to switch the pages.
■ Determining
After moving the pointer or cursor, double-tap the item pointed with the
pointer or cursor to set it instead of using the OK key.
e.g.) Custom
menu screen
e.g.) Basic menu
screen
When using the TOUCH CRUISER pad
Avoid using the TOUCH CRUISER pad continuously for 30
minutes or more. Take regular breaks to rest your eyes and do a
stretching exercise to relax your finger, hand, wrist, forearm and
shoulders.
Do not operate it with unnecessary force or in an improper
posture. May hurt your finger and wrist.
Do not operate the TOUCH CRUISER pad using a pointed
metallic object such as a pen tip. May cause scratches or a failure
of the sensor.
This product is designed to be operated with one finger. In the
following cases, the TOUCH CRUISER pad is not activated.
When operated with a gloved finger
When operated with a pen, ballpoint pen, pencil, etc.
When operated with two or more fingers
When operated with foreign objects placed on the operation pad
When operated with a fingernail
The TOUCH CRUISER pad may not be properly operated when
there are droplets or condensation on the operating range or
when the operation pad is operated with a wet finger or a moist
finger with sweat.
Keep the operating range clean with a dry cloth. When the
operating range gets too dirty, wipe it with a wet cloth and fully dry
before using it.
Note that putting a sticker, etc. to the operating range may cause
a malfunction.
dt20_E.book 40 ページ 2007年12月12日 水曜日 午後2時3分