User's Manual

54
e02_dt20_7e.fm
[54/56]
Before Using the Handset
To switch the display language from English to Japanese: In the Custom
menu, select [Settings]
/ [General settings] / [Select language] / [ 日本語 ].
The initial settings screen appears automatically when the
power is turned on for the first time. Each setting item can
also be set from Menu (When the initial settings are
complete, the stand-by display appears).
When items that have not been set remain, the setting screen
appears every time the power is turned on.
1
Set the date and time (nP. 54).
Set the date and time from 00:00 January 1, 2001 to 23:59
December 31, 2050.
2
Register a terminal security code (nP. 131).
3
Set the Key/Standby i-motion (nP. 112).
4
Set the font size (nP. 127).
When the initial settings are complete, the software update
function confirmation screen appears. Read the description and
select [Agree] (When the initial settings are made from the
menu or the software update is set to other than [auto-update],
the confirmation screen does not appear).
Set the date and time on the FOMA terminal. Set to
automatically correct the date and time.
1
In the Custom menu, select
[Settings]/[General settings]/
[Date settings].
2
Select the [Auto time correction] field/t/select
the setting.
 Select [ON]/i.
 Select [OFF]/select the [Date] field/t/enter the date/
t/select the [Time] field/t/enter the time/t/ i.
Use 24-hour format.
When entering month, day and time, add 0 before numbers one
through nine (example: 01, 02, 03, etc.).
Note
If a FOMA card is inserted, settings are saved to the FOMA card as well.
When the setting of the FOMA terminal handset and the setting of the
inserted FOMA card are different, the setting in the FOMA card is prioritized.
Initial setting
Making the initial setting
 Date and time settings  Change terminal security code
 Key/Standby i-motion  Font size settings
Note
Press H to cancel the initial settings.
Date settings
Setting the date and time
Note
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for approximately
a week or more or the battery remains empty, the settings may be
reset. When this happens, set again after charging the battery.
If the date and time are not set correctly, the following functions
cannot be used properly.
 Redial, Received calls  Auto power ON/OFF
 Alarm  Schedule
 SSL (authentication)  i-appli Auto start
 Starting i-appliDX  Reception, Recording
 Machi-chara
 Record message (voice), Record message (Videophone calls)
 Camera image titles/shooting date

Playback or view of i-motion/music data/e-comic with replay restrictions
dt20_E.book 54 ページ ２００７年１２月１２日 水曜日 午後２時３分