User's Manual

33
e02_dt20_7e.fm
[33/56]
Before Using the Handset
When carrying, keeping the FOMA terminal closed as shown in the
diagram for step 1 is recommended.
■ Normal position
■ Cycloid position
Set to the Cycloid position in stand-by or other screens so that 1Seg is
automatically activated.
Use to select or execute the menus that appear in the operation
guidance. The following shows the keys allotted to select or execute
the menus items that appear in the guidance.
How to open the FOMA terminal
1
Open carefully with both hands.
2
Push the display back as far as
it will go.
1
Open carefully with both hands.
2
Open the display until it stops
midway.
3
Rotate the display 90° to the
right.
4
Note
When rotating the FOMA terminal display, do not rotate in the
opposite direction or further than 90°.
When talking in the Cycloid position, use the flat-plug earphone/
microphone with switch (sold separately) or use hands-free. When
talking with the earpiece, switch to the normal position.
How to use the Multi-guide key and Operation
guidance key
i
t
u
C
avm
dt20_E.book 33 ページ ２００７年１２月１２日 水曜日 午後２時３分