User's Manual

48 Camera
Functions in Photo Camera Mode
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved in
the JPEG format.
“Camera”
→ [Options] → “Picture Size”
1. Select the desired size.
1536 × 2048 dots/1080 × 1920 dots/
1200 × 1600 dots/960 × 1280 dots/
480 × 854 dots/480 × 640 dots/
240 × 320 dots/120 × 160 dots/
1536 × 864 dots/854 × 480 dots
Continuous Shoot
“Camera”
→ [Options] → “Modes” → “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”: The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from
“Fast”, “Normal”, “Slow” or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
Note
• When you select “Manual” to take continuous pictures, press B
manually at the desired speed.
• You cannot use the Continuous Shoot function for picture sizes
larger than 480
× 640 dots. “9 Pictures” and “Overlapped” are
not available for picture sizes larger than 240
× 320 dots.
Taking Panorama Pictures
“Camera”
→ [Options] → “Modes” → “Panorama/
Scanner”
→ “Panorama”
1. Select “On” and press B.
2. Move the phone slowly to keep the + mark aligned with the
assisting lines, and press B.
3. Select “Save”.
Note
• The image is captured automatically if the bar in the lower right
turns blue before B is pressed in step 2.
To Set the Assisting Lines
“Camera”
→ [Options] → “Settings” → “Panorama
Settings”
→ “Assisting Lines”
1. Select “On” or “Off”.
Note
• An error message is displayed if you move the phone fast when
taking panorama pictures with this setting on.