User's Manual

70 Java™
To Set the Blinking Operation
If set to “Off”, the backlight cannot be turned on from the
application.
“Java™”
→ “Java™ Settings” → “Backlight” → “Blink”
1. Select “On” or “Off”.
Vibration
“Java™”
→ “Java™ Settings” → “Vibration”
1. Select “On” or “Off”.
Calls & Alarms
“Java™”
→ “Java™ Settings” → “Calls & Alarms”
1. Select “Voice Call”, “Incoming Messages”, “Alarm” or
“Start Request.”.
2. Select the desired method.
• “Call Priority”, “Message Priority”, “Alarm Priority” or
“Incoming priority”:
The application is suspended automatically, and you can
receive a call or a message, the alarm will sound or
Bluetooth connection will start.
After finishing the call or receiving the message, or when the
alarm or
Bluetooth connection ends, the suspend indicator
( ) is displayed letting you know there is a suspended
application.
• “Call Notice”, “Message Notice”, “Alarm Notice” or “Notice
of Incoming msg”:
The marquee (character scrolls) is displayed on the first line
of the screen while the application continues. If you press
D, the application is suspended, and you can receive the
call. After finishing the call or receiving the message, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
Set Java™ Wallpaper
To Switch the Java™ Wallpaper On or Off
“Java™”
→ “Java™ Settings” → “Set Java™ Wallpaper”
→ “Switch On/Off”
1. Select “On” or “Off”.
To Set the Activation Time
“Java™”
→ “Java™ Settings” → “Set Java™ Wallpaper”
→ “Activation Time”
1. Enter an activation time from 1 to 10 seconds (in 2 digits)
using the keypad.