dt25_E.book 30 ページ 2008年5月14日 水曜日 午後3時11分 Component names and functions Before Using the Handset 1 2 a j k l m n o 3 r b 4 c 5 d e 6 7 k q p t s f u 8 9 g h i z w y ※ Key illustrations are examples and may look different from actual keys. 30 e02_dt25_7e.
dt25_E.book 31 ページ 2008年5月14日 水曜日 午後3時11分 1Earpiece Listen to the other party’s voice. Listen to Record message/Voice memo. 3Main display (nP. 34) 4Optical TOUCH CRUISER , (nP. 39) Slide the finger to perform the same operations as those for w of Multi-guide key. 5i-mode/Operation guidance key i (,) Press to use i-mode (nP. 166). Press to execute the functions of the operation guidance (nP. 33). Press for 1+ seconds to display the i-appli software list screen (nP. 227).
dt25_E.book 32 ページ 2008年5月14日 水曜日 午後3時11分 fPower/End key H Press for 2+ seconds to turn the power on/off (nP. 51). Use to end the function being used and return to stand-by display. Before Using the Handset gEco/VeilView key y Press to use the Eco mode (Power saver) (nP. 115). Press for 1+ seconds to use the VeilView (nP. 124). hTV key x Press to use 1Seg (nP. 270). Press for 1+ seconds to display the 1Seg menu screen. iMouthpiece/Microphone Sends out your own voice.
dt25_E.book 33 ページ 2008年5月14日 水曜日 午後3時11分 How to open the FOMA terminal ■ Cycloid position 1 How to use the Multi-guide key and Operation guidance key Use to select or execute the menus that appear in the operation guidance. The following shows the keys allotted to select or execute the menus items that appear in the guidance. 2 i Open carefully with both hands. 3 Open the display until it stops midway. 4 Rotate the display 90° to the right.
dt25_E.book 34 ページ 2008年5月14日 水曜日 午後3時11分 Before Using the Handset Cancel Cancels the operation such as receiving a message SelAll/ClrAll Selects/Disables all selectable items (Up to 50 items can be selected/disabled depending on the function) Sub display 1q rt fg 72 92 Page ▲/Page ▼ Scrolls the display by page Close a Closes the Submenu, etc. ij < 2 z ※ Icons are shown in the order of main display and sub display.
dt25_E.book 35 ページ 2008年5月14日 水曜日 午後3時11分 b1Seg being recorded (nP. 276) 5i-appli (nP. 227) G i-appli is being activated i-appli stand-by is being activated i-appli stand-by is set* I i-appliDX is being activated i-appliDX stand-by is being activated Q i-appliDX stand-by is set* * Indicates that i-appli is set as the stand-by display, but cannot be used. 6Shortcut menu (nP. 376) m Appears when the function can be added to the Shortcut menu 7i-mode mail/SMS/Area Mail received (nP.
dt25_E.book 36 ページ U/e V/e W/e 2008年5月14日 水曜日 午後3時11分 All lock is set Function lock is set Keypad dial lock and Function lock are set Before Using the Handset K (red)/e Secret mode, Function lock and Keypad dial lock are set K (blue)/e Side key guard, Secret mode, Function lock and Keypad dial lock are set X/e Hands-free in progress USB hands-free in progress Bluetooth hands-free in progress lAlarm (nP. 278, P. 369, P. 373) \ Alarm is set Schedule alarm is set* Reception reserve alarm is set
dt25_E.book 37 ページ 2008年5月14日 水曜日 午後3時11分 # Data is communicated with another device using the Bluetooth function (nP. 394) N Connected to commercially available Bluetooth compatible keyboard (nP. 393) zMultitask (nP. 366) Indicates functions that are running. While two or more functions are running, the Multitask icon appears also in the sub display.
dt25_E.book 38 ページ 2008年5月14日 ! Redial/Sent messages history " Own number u 水曜日 午後3時11分 Data box, Music&Video Channel Icon Before Using the Handset C L Q D 5
dt25_E.book 39 ページ 2008年5月14日 水曜日 午後3時11分 ■ Moving the pointer Optical TOUCH CRUISER Move the pointer or cursor just as covering the whole operating range of the Optical TOUCH CRUISER with finger. The pointer or cursor moves in conjunction with sliding of the finger. e.g.) Custom menu screen ■ Moving the cursor Operating range of Optical TOUCH CRUISER Note In the following cases (screens), the Optical TOUCH CRUISER is not available. However, when the Submenu appears, the pad can be operated.
dt25_E.book 40 ページ 2008年5月14日 水曜日 午後3時11分 Setting the Optical TOUCH CRUISER Before Using the Handset ■ Setting whether to use the Optical TOUCH CRUISER 1 In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]/[Usage settings]. 2 Select the setting/t. ■ Setting the pointer speed/scroll speed 1 In the Custom menu, select [Settings]/[General settings]/[TOUCH CRUISER set]. 2 Select an item/t. 3 Select the speed/t.
dt25_E.book 41 ページ 2008年5月14日 水曜日 午後3時11分 Retrieving a function from each menu Stand-by a Custom menu Basic menu o Before Using the Handset t For details on operating shortcut menu nP. 376 For details on the available functions nP. 442 Use w and the Optical TOUCH CRUISER in all menus. Press the dial key corresponding to the menu item number (U, V, W, etc.) to select a function. However, in the Custom menu/ Horizontal display menu, a function may not be selected by using the menu item numbers.
dt25_E.book 42 ページ 2008年5月14日 水曜日 午後3時11分 ■ Retrieving from the Basic menu In the Custom menu Example: Activating 1Seg by entering function numbers Before Using the Handset , t , t or or w t w t Custom menu When [1Seg] appears 961 When 1Seg is activated Basic menu In the Horizontal display menu , t Note When the Custom menu image is changed by Kisekae Tool, the operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP.
dt25_E.book 43 ページ 2008年5月14日 水曜日 午後3時11分 Supportbook Displaying the Supportbook Before inserting or removing the FOMA card, turn off the power, position the back facing upwards and remove the battery pack. Close and hold the FOMA terminal firmly with your both hands. ■ Inserting 1 Hold the FOMA card with the IC facing down and set as shown below (1). Before Using the Handset Use this function for unsure operations.
dt25_E.book 44 ページ 2008年5月14日 水曜日 午後3時11分 Note Before Using the Handset Inserting or removing the FOMA card forcibly may damage the card. Use caution. Refer to the FOMA card user’s guide for more information on the FOMA card. Do not misplace the FOMA card once it is taken out. Security codes The FOMA card has a “PIN1 code” and a “PIN2 code”. Both are set to [0000] by default but can be changed to a four- to eight-digit number by the user (nP. 128).
dt25_E.book 45 ページ 2008年5月14日 水曜日 午後3時11分 Explanation that follows refers to the FOMA card inserted at time of data/files retrieval as “one’s own FOMA card” and other FOMA cards as “another’s FOMA card”. One’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-appli that have been run, allowing viewing and playback of data.
dt25_E.book 46 ページ 2008年5月14日 水曜日 午後3時11分 1 About WORLD WING Before Using the Handset WORLD WING is a DOCOMO FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls even overseas by the FOMA card (green/white) and supported FOMA terminal. If subscribed to the FOMA service after September 1, 2005, subscription for “WORLD WING” is not required.
dt25_E.book 47 ページ 2008年5月14日 水曜日 午後3時11分 ■ Removing 1 Follow step 1 of “Inserting” to remove the back cover. ■ Estimated charge times and LED display 2 FOMA AC Adapter 01/02 Approx. 120 min FOMA DC Adapter 01/02 Approx. 120 min The battery pack has a tab that makes it easy to remove. Press the tab with your fingers without placing too much force. Lift up the battery pack to remove.
dt25_E.book 48 ページ 2008年5月14日 水曜日 午後3時11分 Before Using the Handset Continuous talk time is estimated as the usage time at normal transmission signal strength, and continuous stand-by time is estimated as the usage time while moving with the FOMA terminal folded at normal signal strength.
dt25_E.book 49 ページ 2008年5月14日 水曜日 午後3時11分 Frequently recharging the battery when its power is still remaining enough may shorten the life of the battery pack. It is recommended to use the battery to a certain level before recharging. The battery pack cannot be charged by itself. 2 Charging using the AC adapter/DC adapter 100 VAC outlet [Read “FOMA AC adapter 01/02 (sold separately) and FOMA DC adapter 01/02 (sold separately) user’s guide” carefully.
dt25_E.book 50 ページ 2008年5月14日 水曜日 午後3時11分 Place the FOMA terminal as the figure shows (1), and push it in the direction of the arrow (2) until it clicks. Note Before Using the Handset Do not forcibly insert or remove. May cause damage to the external connector terminal and the connector. Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the external connector terminal cover. May damage the cover.
dt25_E.book 51 ページ 2008年5月14日 水曜日 午後3時11分 Battery level If the battery runs out How to check the battery level Battery level is still sufficient. $ Battery is almost empty. Charge the battery. % Battery is empty (Power will turn off soon). { Battery pack is being charged. Battery level is low. Checking the battery level with sound and display 1 In the Custom menu, select [Settings]/[General settings]/[Check status]/[Battery level]. Before Using the Handset " # [Battery empty.
dt25_E.book 52 ページ 2008年5月14日 水曜日 午後3時11分 If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”. Before Using the Handset Welcome mail “Welcome$SH906iTV%&” is saved by default. To check a welcome mail: In stand-by, press t/select the stock icon C (mail message)/t. • For details on the following operations nP.
dt25_E.book 53 ページ 2008年5月14日 水曜日 午後3時11分 Note Press H to cancel the initial settings. Date settings Setting the date and time Set the date and time on the FOMA terminal. Set to automatically correct the date and time. 1 In the Custom menu, select [Settings]/[General settings]/ [Date settings]. 2 Select the [Auto time correction] field/t/select the setting. Select [ON]/i. Select [OFF]/select the [Date] field/t/enter the date/ t/select the [Time] field/t/enter the time (24-hour format)/t/i.
dt25_E.book 54 ページ 2008年5月14日 水曜日 午後3時11分 Related Operations Change the time zone manually Related Operations Check the Notify caller ID setting Before Using the Handset In the Date settings screen, select the [Auto time correction] field/t/[OFF]/C/select a time zone/ t/select a city/t/i. In the Custom menu, select [Settings]/[NW Services]/ [Notify caller ID]/[Check setting].