User Manual

39
e02_dt25_7e.fm
[39/54]
Before Using the Handset
Use the Optical TOUCH CRUISER to perform the same
operations as those for w of Multi-guide key (e.g. moving
the cursor or scrolling the screen).
Move the pointer or cursor just as covering the whole operating
range of the Optical TOUCH CRUISER with finger.
The pointer or cursor moves in conjunction with sliding of the finger.
■ Moving the pointer
In the Custom menu screen or while i-mode or
Full Browser is connected, move the pointer (L,
M, K, etc.) up/down, left/right or diagonally to
select an item.
In some Custom menus, the pointer shape
varies or the pointer is not supported.
Move the pointer to the edge of the screen
while i-mode or Full Browser is connected to
show G, R/\, Z and scroll the screen to
the direction of the arrow. If Link is set, M
appears, and press t to move to the linked
page.
The pointer moving speed varies depending
on the finger sliding speed.
■ Moving the cursor
In the Basic menu or Submenu, move the cursor
up/down and left/right in the same way as w of
Multi-guide key.
When there are multiple pages, move the
cursor to switch the pages.
Optical TOUCH CRUISER
Note
In the following cases (screens), the Optical TOUCH CRUISER is
not available. However, when the Submenu appears, the pad can
be operated.
 Stand-by  i-appli  Dial input screen
 Character reader, Bar code reader, Card reader screen
 While making, receiving or during the voice call/Videophone
call/PushTalk, etc.
Operating range of
Optical TOUCH
CRUISER
When using the Optical TOUCH CRUISER
Do not operate the Optical TOUCH CRUISER using a pointed
metallic object such as a pen tip. May cause scratches or a failure
of the sensor.
Note that putting a sticker, etc. to the operating range may cause
a malfunction.
e.g.) Custom
menu screen
e.g.) Basic menu
screen
dt25_E.book 39 ページ ２００８年５月１４日 水曜日 午後３時１１分