Operation Manual

35
Before Using the Handset
ɡ Moving pointer
In the stand-by display, in the Custom menu
screen or during i-mode or Full Browser, etc.,
move the pointer (L, K, etc.) up/down, left/right
or diagonally to select an item.
In some Custom menus, the pointer shape
varies or the pointer is not supported.
Select icons displayed in the stand-by display
and press t to perform the following action.
 Stock icon: To check information details
 Popup message: To activate i-concier
 i-Channel ticker: To display the channel list
 Stand-by memo: To display the Stand-by
memo editing screen
 Stand-by clock (when Clock display is set to [ON(Large)]): To
activate Schedule
Move the pointer to the edge of the screen during i-mode or Full
Browser to show G, R/\, Z and scroll the screen to the direction
of the arrow. If Link is set, M appears, and press t to move to the
linked page.
The pointer moving speed varies depending on the finger sliding
speed.
ɡ Moving cursor
In the Basic menu or Submenu, move the cursor
up/down and left/right in the same way as w of
Multi-guide key.
When there are multiple pages, move the
cursor to switch the pages.
e.g.) Custom
menu screen
Cautions when using the Optical TOUCH CRUISER
Do not operate the Optical TOUCH CRUISER using a pointed
metallic object such as a pen tip. May cause scratches or a failure
of the sensor.
Note that putting a sticker, etc. to the operating range may cause
a malfunction.
The Optical TOUCH CRUISER may not operate properly if
foreign objects, such as dust, sand, etc. are attached to the finger.
e.g.) Basic menu
screen