Operation Manual

440
Overseas Use
Make a call from overseas using the international roaming
service.
Make a call from your country of stay to Japan or other countries.
1
In stand-by, enter [+] (press 0 for 1+ seconds),
country code, area code (city code) and other
party’s phone number.
: When the area code (city code) begins with 0, omit the 0 when
dialing (However, include 0 when making a call to landline
phones in some countries or regions such as Italy).
2
Press s (Phone)/i (V.phone).
ɡ Making an international call outside your country
of stay using Country code conversion
Set Country code conversion (nP. 61) to [ON] and set the country
code frequently called to easily make an international call.
0 at the beginning of a phone number is automatically converted to
the country code set in Country code conversion.
Example: Make a call from phonebook
1
In stand-by, press a/select the other party.
2
Press s (Phone)/i (V.phone).
3
Select [Call].
: To dial a phone number as stored in the phonebook: Select
[Original number].
ɡ Making a call to the phone in country saved in Set
country code
Save a country code using Set country code (nP. 62) to select a
country code before making an international call.
The following operation is available overseas only.
1
In stand-by, enter a phone number/C/[Add
prefix setting]/[International Call].
2
Select the country code/t.
3
Press s (Phone)/i (V.phone).
Make a domestic call at your country of stay in the same way as you
do in Japan.
1
In stand-by, enter a phone number.
2
Press s (Phone)/i (V.phone).
: Always dial the area code (city code), even when the number is
in the same area.
: When making a domestic call at your country of stay using the
phonebook, select [Original number] in step 3 of “Making an
international call outside your country of stay using Country
code conversion” on P. 440.
Making a call at your country of stay
Making a call outside your country of stay
(including Japan)
Making a call in your country of stay
Refer to the DOCOMO “International Services website” for details
on available countries, country codes and telecommunications
carriers.
Even when Notify caller ID of the network service (nP. 50) is set
to “Send ID”, [Unavailable] or [User unset] appears depending on
the telecommunications carrier, and the caller ID may not be
displayed correctly.