User's Manual

e02_dv62_7e.fm
[37/56]
37
Continued on next page
Before Using the Handset
■ Retrieving from the Basic menu
In the Basic menu, input the function number, which is assigned to
setting menu, to quickly retrieve the function to be used
(nP. 454).
When [Submenu] appears in the Operation
guidance, press C to display functions
(Submenu) that can be used in the screen. Select
the displayed Submenu with w or the Optical
TOUCH CRUISER. If there are multiple pages in
the Submenu, change pages with w or the
Optical TOUCH CRUISER.
Alternatively, press the dial key corresponding to
the menu item number (U, V, W, etc.) to select
a function. However, some Submenus do not
have item numbers.
In the viewer position, operate by putting the finger on the
touch panel (screen).
In other than the viewer position, the touch panel is available during
Videophone (nP. 78).
The operations differ depending on the function and screen in use.
In addition, the message stating that the operation is not available
appears when the touch panel cannot be used.
Operate the touch panel inside the following operating range of touch
panel. However, when a substitute image appears in the right side of the
screen, operate in the left side of the screen where functions are shown.
The notation of operation described in this manual and its meaning
are shown below.
Touch
Put the finger on the touch
panel and put it off.
Double-touch
Quickly touch the same point twice.
When the Custom menu image is changed by Kisekae Tool, the
operation may differ from the description in this manual. In this
case, switch the menu screen to the Basic menu (nP. 35) or
perform the Reset menu screen (nP. 115).
Selecting a function from Submenu
,
(;)
t
Basic menu When [1Seg]
appears
When 1Seg is
activated
,
(;)
t
or
w
t
or
u
t
Submenu screen
Touch panel
Operations in viewer position
Touch panel
Operating range of the touch panel
dv62_E.book 37 ページ ２００８年１１月３日 月曜日 午後８時１８分