User's Manual

Entering Characters 33
G-O: Long press to input corresponding Chinese
character displayed in the candidate field.
R: Long press to display the Input Language screen.
Changing the Input Method between Stroke and PinYin
See “Changing the Input Method” on page 31.
Using Stroke Mode
The following is an example of entering “ ”.
1. Change the input mode to XT9 Stroke mode.
2. Press I G J to display the
corresponding stroke for “ ”.
3. Press b to move the cursor to the
candidate field and press abcd to
highlight the desired candidate, and then
press B.
You can also enter the character long
pressing the corresponding numeric key.
Using PinYin Mode
The following is an example of entering the character “ ”.
1. Press K, then press d for for the first
letter of the reading, then highlight “l”.
2. Press b to move the cursor to the
candidate field and press abcd to
highlight the desired candidate, and then
press B.
You can also enter the character long
pressing the corresponding numeric key.
Candidate field
Input field