User's Manual

ManualsBrandsSharp ManualsCell PhonesCellular Phone

e02_pr10_7e.fm

[34/46]

Before Using the Handset

■ Retrieving from the Basic menu

Example: Activating 1Seg by entering function numbers

When [Submenu] appears in the operation

guidance, press C to display functions

(Submenu) that can be used in the screen.

Select the displayed Submenu with w. If there

are multiple pages in the Submenu, change

pages with w.

Alternatively, press the dial key corresponding

to the menu item number (U, V, W, etc.) to

select a function. However, some Submenus do

not have item numbers.

Use this function for unsure operations.

After the Support Book appears, check the

explanation and operation procedures of

each function. In addition, directly start

functions that were looked up in the

Support Book.

In stand-by, press $/[Support Book].

Select a menu or item/t.

: To start functions directly: Select the function to start/t/

[Yes].

A FOMA card is an IC card that records personal information,

such as phone numbers. A FOMA card can store phonebook

data and SMS. By switching FOMA cards, multiple FOMA

terminals can be used for different purposes as needed.

If a FOMA card is not inserted, transmission functions such as

voice/Videophone calls, i-mode, mail transmission and packet

transmission are not available on the FOMA terminal.

When the Custom menu image is changed by Kisekae Tool, the

operation may differ from the description in this manual. In this

case, switch the menu screen to the Basic menu (nP. 32) or

perform Reset menu screen (nP. 96).

Selecting a function from Submenu

Basic menu When 1Seg is

activated

961

Submenu screen

Support Book

Displaying Support Book

FOMA card

Using FOMA card

pr10_E.book 34 ページ２００８年１１月１８日　火曜日　午前１１時１７分

Summary of content (13 pages)

PAGE 1
pr10_E.book 34 ページ２００８年１１月１８日火曜日午前１１時１７分 ■ Retrieving from the Basic menu Support Book Example: Activating 1Seg by entering function numbers Before Using the Handset 961 Basic menu When 1Seg is activated When the Custom menu image is changed by Kisekae Tool, the operation may differ from the description in this manual. In this case, switch the menu screen to the Basic menu (nP. 32) or perform Reset menu screen (nP. 96). Selecting a function from Submenu In stand-by, press $/[Support Book].
PAGE 2
pr10_E.book 35 ページ２００８年１１月１８日火曜日午前１１時１７分 Inserting/Removing FOMA card 2 Push the top of the FOMA card and pull it out straight as shown on the below (2). : Do not allow the FOMA card to fall when removing it. ■ Inserting FOMA card 1 Pull the FOMA card lever down (1). Notch 3 Pull the FOMA card lever up (3). IC (gold) 2 Hold the FOMA card with the IC facing down, and set as shown on the below (2). 3 Pull the FOMA card lever up (4). 1 2 3 : Push the FOMA card all the way in 3.
PAGE 3
pr10_E.book 36 ページ２００８年１１月１８日火曜日午前１１時１７分 FOMA card security functions Before Using the Handset The FOMA terminal has built-in FOMA card security functions (FOMA card restriction functions) as functions for protecting personal data and files. When data or files are retrieved using any of the following methods or i-appli is running with the FOMA card inserted into the FOMA terminal, FOMA card security functions are automatically set in the retrieved data or files.
PAGE 4
pr10_E.book 37 ページ２００８年１１月１８日火曜日午前１１時１７分 Example: When setting [Melody A], for which FOMA card security functions are set, as a ring tone When one’s own FOMA card is taken out or is replaced with another’s FOMA card, ring tone returns to default setting. When one’s own FOMA card is put back, the ring tone returns to [Melody A]. FOMA card security functions cannot be set for data received using Ir communication or data transmission functions, and still pictures/movies, etc.
PAGE 5
pr10_E.book 38 ページ２００８年１１月１８日火曜日午前１１時１７分 Attaching/Removing battery pack 3 Attach the back cover (5). : Position the back cover as shown in the illustration and then push the back cover and slide into place. Use the Battery Pack SH21 exclusive to the FOMA terminal. Before Using the Handset Turn off the power, close the FOMA terminal, and hold it in your both hands before attaching or removing the battery pack.
PAGE 6
pr10_E.book 39 ページ２００８年１１月１８日火曜日午前１１時１７分 Charging ■ Cautions when charging Do not charge for long periods of time with the power left on. If the FOMA terminal is left on after charging is complete, the battery pack charge decreases. In such cases, the AC or DC adapter charges the battery again.
PAGE 7
pr10_E.book 40 ページ２００８年１１月１８日火曜日午前１１時１７分 Before Using the Handset The actual usage time is a combination of stand-by time and talk time, and the longer the talk time, the shorter the stand-by time becomes. 1Seg watching time is estimated as the watching time at normal transmission signal strength with the Flat-plug Stereo Earphone Set P01 (sold separately) used.
PAGE 8
pr10_E.book 2 41 ページ２００８年１１月１８日火曜日午前１１時１７分 When inserting the AC adapter power plug into an outlet or inserting the DC adapter power plug into a car cigarette lighter socket, Charge start sound is heard, charging LED illuminates, and charging starts. Before Using the Handset Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Do not forcefully pull the external connector terminal cover. May damage the cover.
PAGE 9
pr10_E.book 42 ページ２００８年１１月１８日火曜日午前１１時１７分 Before Using the Handset 4 1 Connector (Face the side with the arrows up) 2 100V AC outlet 4 Pull the AC adapter out of the outlet when left unused for a long period of time. When Charge start sound is not heard or when charging LED does not illuminate, check that the FOMA terminal is placed securely in the desktop holder (except when terminal is turned off, Manner mode is set or Charge start sound is Silent).
PAGE 10
pr10_E.book 43 ページ２００８年１１月１８日火曜日午前１１時１７分 : Wait approximately 2 seconds and the display disappears. : The battery level sound is heard at the volume set in Key/ Standby i-motion (nP. 86). : If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”. If battery runs out If initial settings are not yet completed, the setting screen appears every time the power is turned on.
PAGE 11
pr10_E.book 44 ページ２００８年１１月１８日火曜日午前１１時１７分 : When the initial settings are complete, the software update function confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear). Select language Changing screen display to English Before Using the Handset 1 In the Custom menu, select [Settings]/[一般設定]/[Bilingual]/[English].
PAGE 12
pr10_E.book 45 ページ２００８年１１月１８日火曜日午前１１時１７分 When Auto time correction is set to [ON] When the power is turned on, the FOMA terminal adjusts the time by connecting to the network’s time information. If the FOMA terminal does not adjust the time even when the power is turned on, turn off the power and restart. Time may not be adjusted depending on the signal status. Time may be off by a few seconds.
PAGE 13
pr10_E.book 46 ページ２００８年１１月１８日火曜日午前１１時１７分 Setting Notify caller ID/No caller ID in advance Before Using the Handset 1 In the Custom menu, select [Settings]/[NW Services]/[Notify caller ID]. 2 Select [Notify caller ID]. 3 Select the setting. : To check the setting: Select [Check setting]. : To notify caller ID: Select [Yes]. : To not notify caller ID: Select [No]. Notify caller ID setting cannot be set from outside the service area.