User's Manual

e02_dv65_7e.fm
[55/56]
55
Continued on next page
Before Using the Handset
When items that have not been set remain, the setting screen appears
every time the power is turned on.
Alternatively, select [Settings]/[Initial setting] in the Custom menu to
display the setting screen.
1
Set the date and time (nP. 55).
2
Register a terminal security code (nP. 113).
3
Set the Key/Touch sound (nP. 94).
4
Set GPS Location provision ON/OFF (nP. 304).
5
Set the font size collectively (nP. 109).
: When the initial settings are complete, the software update function
confirmation screen appears. Read the description and select
[Agree] (When the initial settings are made from the menu or the
software update is set to other than [auto-update], the confirmation
screen does not appear).
Set the date and time on the FOMA terminal.
1
In the Custom menu, select
[Settings]/[General settings]/[Date
settings].
2
Select the [Auto time correction] field/t/select the
setting.
; Select [ON]/i.
; Select [OFF]/select the [Date] field/t/enter the date/t/
select the [Time] field/t/enter the time (24-hour format)/
t/i.
• When entering month, day and time, add 0 before numbers one
through nine (example: 01, 02, 03, etc.).
• Set the date and time from 00:00 January 1, 2001 to 23:59
December 31, 2050.
 Date and time settings  Change terminal security code
 Key/Touch sound  Location request menu
 Set all font size
Press H to cancel the initial settings.
Date settings
Setting date and time
When Limit settings is set to [Enable], the terminal security code must
be entered in the Date settings.
The date and time that are set are saved even if the battery pack is
removed, but if the battery pack remains removed for approximately 30
seconds or more, the settings are reset. Also, if the battery remains
empty, the settings may be reset. When this happens, set again after
charging the battery.
If the date and time are not set correctly, the following functions cannot
be used properly.
 Redial, Received calls  Auto power ON/OFF
 Alarm  Schedule
 SSL/TLS (authentication)  i-appli Auto start
 Starting i-appliDX  Reception, Recording
 Machi-chara  Software update
 Pattern definitions update
 Record message (voice), Record message (Videophone calls)
 Camera image titles/shooting date
 Playback of i-motion or music data with expiration date/period for
replay
 View of e-books/e-dictionaries/e-comics with expiration date/period
for browse
When [Auto time correction] is set to [ON]
When the power is turned on, the FOMA terminal adjusts the time by
connecting to the network’s time information.
If the FOMA terminal does not adjust the time even when the power is
turned on, turn off the power and restart.
Time may not be adjusted depending on the signal status.
Time may be off by a few seconds.
e02_dv65_7e.fm 55 ページ ２００９年３月２０日 金曜日 午後５時２８分