User's Manual

ManualsBrandsSharp ManualsCell PhonesCellular Phone

e02_dv67_7e.fm

[39/50]

Before Using the Handset

When [Submenu] appears in the operation guidance,

press C to display functions (Submenu) that can be

used in the screen. Select the displayed Submenu

with w or the Optical TOUCH CRUISER.

If there are multiple pages in the Submenu, change

pages with w or the Optical TOUCH CRUISER.

Alternatively, press the dial key corresponding to the

menu item number (U, V, W, etc.) to select a

function. However, some Submenus do not have item

numbers.

■ Target data when operating functions from Submenu

When operating functions from Submenu of data list screen, some

functions target at selected data only while other functions target at all

data in the list screen. When attempting to operate selected data only,

select the data to operate in advance.

 Function targeting at selected data only

Example: Edit title, Edit file name, Delete one, etc.

 Function targeting at all data in the list screen

Example: Delete all, Copy all in folder, Move all in folder, etc.

Use this function for unsure operations. After

the Support Book appears, check the

explanation and operation procedures of each

function. In addition, directly start functions

that were looked up in the Support Book.

In stand-by, press $/[Support Book].

Select a menu or item/t.

: To start functions directly: Select the function to start/t/[Yes].

A FOMA card is an IC card that records personal information,

such as phone numbers. A FOMA card can store phonebook data

and SMS. By switching FOMA cards, multiple FOMA terminals

can be used for different purposes as needed.

If a FOMA card is not inserted, transmission functions such as voice/

Videophone calls, i-mode, mail transmission and packet transmission are

not available on the FOMA terminal.

Before inserting or removing the FOMA card, turn off the power, position

the back facing upwards and remove the battery pack. Close and hold

the FOMA terminal securely with your both hands.

Selecting a function from Submenu

Submenu screen

Support Book

Displaying Support Book

FOMA card

Using FOMA card

Inserting/Removing FOMA card

dv67_E.book 39 ページ２００９年４月２２日　水曜日　午後５時３３分

Summary of content (40 pages)

PAGE 1
dv67_E.book 39 ページ２００９年４月２２日水曜日午後５時３３分 Selecting a function from Submenu Support Book Displaying Support Book Use this function for unsure operations. After the Support Book appears, check the explanation and operation procedures of each function. In addition, directly start functions that were looked up in the Support Book.
PAGE 2
dv67_E.book 40 ページ２００９年４月２２日水曜日午後５時３３分 ■ Inserting FOMA card Before Using the Handset 1 Hook a finger on the tab and pull the tray out (1). 2 Hold the FOMA card with the IC facing up and set on the tray (2). : Pull out the tray straight until it stops. Notch IC (gold) 3 Push the tray all the way in (3). 2 3 Tray ■ Removing FOMA card 1 Hook a finger on the tab, pull the tray out (1) and remove the FOMA card (2). : Do not allow the FOMA card to fall when removing it.
PAGE 3
dv67_E.book 41 ページ２００９年４月２２日水曜日午後５時３３分 One’s own FOMA card One’s own FOMA card security functions are set for downloaded data, files attached to received mail and i-appli that have been run, allowing viewing and playback of data. Another’s FOMA card Before Using the Handset The following indicates the data for which FOMA card security is set.
PAGE 4
dv67_E.book 42 ページ２００９年４月２２日水曜日午後５時３３分 If the FOMA card is replaced with another’s FOMA card after i-appli stand-by is set, the set i-appli cannot be activated in stand-by, and the image set in Stand-by display appears. Attaching/Removing battery pack Use the Battery Pack SH22 exclusive to the FOMA terminal. Before Using the Handset FOMA card type Note the following differences between “FOMA card (blue)” and “FOMA card (green/white)” used on the FOMA terminal.
PAGE 5
dv67_E.book 43 ページ２００９年４月２２日水曜日午後５時３３分 the back cover (5). 3 Attach : Place the back cover as shown in the illustration and then push the back cover and slide. Charging 5 Before Using the Handset The battery pack is not fully charged at the time of purchase. Be sure to charge the battery using the exclusive AC or DC adapter (sold separately) before use. ■ Cautions while charging ■ Removing battery pack 1 Follow step 1 of “Attaching battery pack” to remove the back cover.
PAGE 6
dv67_E.book 44 ページ２００９年４月２２日水曜日午後５時３３分 Before Using the Handset Check that the battery pack has been properly attached when charging LED flashes red. The LED also flashes red when the battery pack has reached the end of its service life. The battery pack can also be charged with the FOMA terminal turned on (Battery icon flashes during charging). When the battery becomes warm, charging may automatically stop even if the battery has not been fully charged.
PAGE 7
dv67_E.book 45 ページ２００９年４月２２日水曜日午後５時３３分 : Check the direction (See diagram) of the connector, keep it parallel with the FOMA terminal and securely push all the way in until it clicks. ■ About charging batteries 2 Before Using the Handset Refer to user’s guide of FOMA AC Adapter 01/02 (sold separately), FOMA AC Adapter 01 for Global use (sold separately), or FOMA DC Adapter 01/02 (sold separately). FOMA AC Adapter 01 covers only 100V AC.
PAGE 8
dv67_E.book 46 ページ２００９年４月２２日水曜日午後５時３３分 Do not forcibly insert or remove. May cause damage to the external connector terminal and the connector. Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time. Before Using the Handset Do not forcefully pull the external connector terminal cover. May damage the cover. Do not place objects near the FOMA terminal when charging. May damage the FOMA terminal.
PAGE 9
dv67_E.book 47 ページ２００９年４月２２日水曜日午後５時３３分 When the FOMA terminal placed in the desktop holder is set to the Cycloid position, operate while holding it so as not to come off from the desktop holder. : Battery level is displayed in percentage and graphic. In addition, it is notified by the number of the battery level sound according to its remaining amount. Graphic Five times Checking battery level If the battery icon is changed to [電池残量$$], battery level is displayed in percentage.
PAGE 10
dv67_E.book 48 ページ２００９年４月２２日水曜日午後５時３３分 Turning power OFF Power ON/OFF Turning power ON/OFF 1 Before Using the Handset Turning power ON 1 Press H (for 2+ seconds). : It may take some time for the wakeup screen to appear. : The wakeup screen appears followed by the initial settings screen. Proceed to Initial setting (nP. 48). : If initial settings have been completed, the screen shown on the right appears when power is turned on. This screen is called the “stand-by display”.
PAGE 11
dv67_E.book 49 ページ２００９年４月２２日水曜日午後５時３３分 confirmation screen appears. Read the description and select [Agree] (When the initial settings are made from the menu or the software update is set to other than [auto-update], the confirmation screen does not appear). Press H to cancel the initial settings. Date settings Setting date and time Set the date and time on the FOMA terminal. 1 2 In the Custom menu, select [Settings]/[General settings]/[Date settings].
PAGE 12
dv67_E.book 50 ページ２００９年４月２２日水曜日午後５時３３分 Before Using the Handset During overseas use, Japan time and local time (or time set in City) appear in the dual display except for the following cases.
PAGE 13
dv67_E.book 299 ページ２００９年４月２２日水曜日午後５時３３分 Map/GPS Function Using Map/GPS function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300 Checking your location . . . . . . . . . . . . . . . . . . . . . . 301 Setting position location . . . . . . . . . . . . . . . . . . . . . . 302 Viewing Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Using GPS compatible i-appli. . . . . . . . . . . . . . . . . .
PAGE 14
dv67_E.book 300 ページ２００９年４月２２日水曜日午後５時３３分 Using Map/GPS function Map/GPS Function Note that DOCOMO shall not be liable for the pure economic loss if you cannot confirm the positioning (communication) result with FOMA terminal failure, malfunction, error or external factors such as power failure (including battery exhaustion). FOMA terminals cannot be used as navigation system for professional use of aircrafts, vehicles, person, etc.
PAGE 15
dv67_E.book 301 ページ２００９年４月２２日水曜日午後５時３３分 ■ Using GPS compatible i-appli Even if GPS compatible i-appli is set for Select Map, a map may not appear properly when location information that GPS compatible i-appli does not support is provided. In this case, packet transmission charges apply. ■ Location history [_], the icon indicating that location is positioned overseas, appears for positioned location history in the location history list screen/location history screen. [.
PAGE 16
dv67_E.book 302 ページ２００９年４月２２日水曜日午後５時３３分 : GPS compatible i-appli is activated after positioning the present location. Set position loc. Setting position location Setting GPS button Set the operation that is automatically launched after positioning the present location by pressing y for 1+ seconds.
PAGE 17
dv67_E.book 303 ページ２００９年４月２２日水曜日午後５時３３分 Starting GPS compatible i-appli by one-touch operation 1 In stand-by, press y. : GPS compatible i-appli is started according to Select Map. By default, the FOMA terminal is set to activate “Map Application”. Using “地図アプリ” (Map Application) “Map Application” is a convenient i-appli for viewing the map of the present location or specified location, searching the peripheral area information or navigating to a destination.
PAGE 18
dv67_E.book 304 ページ２００９年４月２２日水曜日午後５時３３分 Loc. request menu Providing location information on request Set whether to provide the present location on the request from the other party. Map/GPS Function Location provision may require the subscription to an information provider supporting the service and the service usage fee. To use a service supporting location provision, set Location provision ON/OFF to [Loc. provision:ON] or [Reject No. unset].
PAGE 19
dv67_E.
PAGE 20
dv67_E.
PAGE 21
dv67_E.book 307 ページ２００９年４月２２日水曜日午後５時３３分 When the 2in1 service is used, only Number A is available regardless of the mode. If the location information provision is requested with Number B, the location information is not provided, and the failure of search is notified to the other party. 1 In the Custom menu, select [LifeKit]/[Map/GPS]/ [Loc.notification/set]/[Location notification]. 2 Select the service client.
PAGE 22
dv67_E.book 308 ページ２００９年４月２２日水曜日午後５時３３分 [Phone number]/enter a phone number. 5 Select ; Select [Search phonebook]/select a recipient/t. ; Select [Direct input]/enter a phone number/t. : The phone number already saved as location service client cannot be added. [Auto]/select the setting/t. 6 Select : If automatic notice is set to [Yes], automatically notifies the present 7 location to the recipient when a voice/Videophone call is made to a saved phone number.
PAGE 23
dv67_E.book 309 ページ２００９年４月２２日水曜日午後５時３３分 2 History type [Position location]/[Location notification]/[Location provision] appears. For [Location notification]/[Location provision], the icon and the information of the service client or service client for provision appear.
PAGE 24
dv67_E.book 2 310 ページ２００９年４月２２日水曜日午後５時３３分 Select a location information to add. ; Select [From position loc.]/t/[Yes]. • The present location is positioned by GPS function. ; Select [From loc. history]/select a location history/i/ [Yes]. ; Select [From image]/select an image/i. ; Select [Loc. info details]. ; Select [Del. location info]. : For images saved in My picture of Data box or i-mode mail, location information added to the phonebook can be selected.
PAGE 25
dv67_E.book 358 ページ２００９年４月２２日水曜日午後５時３３分 Using Ir communication with i-appli Use the Ir communication function from running i-appli. Activating i-appli from Ir communication is also possible. For details on activating Ir communication from i-appli nP. 284 15° 15° Activating i-appli from Ir communication Approx. 4 m During Ir communication, if a signal to activate i-appli is received from devices supporting Ir communication, software can be activated.
PAGE 26
dv67_E.book 359 ページ２００９年４月２２日水曜日午後５時３３分 For an image, i-motion, Melody, PDF, or Decome-Anime Template in the Data box, Sending and receiving all data items is not available. For other than those above, data that can be sent and received or operations when various lock functions are set are same as for Ir communication (nP. 354). For details on starting iC communication from i-appli nP. 284 Data communication via iC communication is not available while charging.
PAGE 27
dv67_E.book 390 ページ２００９年４月２２日水曜日午後５時３３分 ■ Making a call after entering a phone number 1 In stand-by, enter a phone number/press the switch for 2+ seconds. 2 Press the switch for 2+ seconds to finish call. : Call can also be made from phonebook and Redials/Received calls. If multiple phone numbers are saved to memory numbers set in Headset switch to call, the first phone number saved is called.
PAGE 28
dv67_E.book 391 ページ２００９年４月２２日水曜日午後５時３３分 Supported version and supported profiles What can be performed using Bluetooth connection ■ Talking with Headset/Hands-free (HSP/HFP) Connect commercially available Bluetooth compatible Headset to the FOMA terminal to talk wirelessly. Connect a commercially available Bluetooth compatible hands-free device such as a car navigation system to the FOMA terminal to talk during hands-free operation using the car navigation system.
PAGE 29
dv67_E.book 392 ページ２００９年４月２２日水曜日午後５時３３分 ■ Cooperating with Bluetooth compatible car navigation system (SPP) Connect with a car navigation system complying with Photoremo@Navi standard to transmit location information to a car navigation system or send a mail transferred from a car navigation system with the FOMA terminal. The following sounds are output from the Bluetooth device or the FOMA terminal depending on the connected service.
PAGE 30
dv67_E.book 393 ページ２００９年４月２２日水曜日午後５時３３分 ■ Using Bluetooth devices simultaneously Connect Bluetooth simultaneously, for example, listening to the music on the Bluetooth device while composing mail with a Bluetooth compatible keyboard. For details on the combinations of functions that can be used simultaneously nP. 471 For Hands-free and Headset services, the profile connected first takes priority. However, they can be simultaneously switched to connection stand-by.
PAGE 31
dv67_E.book , ; 394 ページ LAN Audio device ２００９年４月２２日 _ 水曜日午後５時３３分 Searching is not available in the following cases.
PAGE 32
dv67_E.book 395 ページ２００９年４月２２日水曜日午後５時３３分 & Already registered device that is being connected % Already registered and connected device that is set to default connection device Switching to registration stand-by/connection stand-by 3 Device name Switch to receive a registration request/connection request from other Bluetooth devices in stand-by display. 2 1 Select a Bluetooth device to connect to/t.
PAGE 33
dv67_E.book 396 ページ２００９年４月２２日水曜日午後５時３３分 ■ When accepting a connection request from registered Bluetooth device Automatically connect and [L] becomes flashing at approximately 0.5-second intervals. When accepting a connection request from already connected service, or when there are two connecting Bluetooth devices, connection is not available. Making a call using Bluetooth devices 1 Connect a Bluetooth device using Headset service or Hands-free service.
PAGE 34
dv67_E.book 397 ページ２００９年４月２２日水曜日午後５時３３分 If a voice or music is stopped from a Bluetooth device during the playback, the FOMA terminal may be outside the Bluetooth area or the Bluetooth device is turned off. Check the FOMA terminal and Bluetooth device. In this case, the Audio service may be disconnected depending on the Bluetooth device. To play the voice or music from the Bluetooth device again, reconnect the Audio service.
PAGE 35
dv67_E.book 398 ページ２００９年４月２２日水曜日午後５時３３分 ■ Bluetooth compatible keyboard Text input is not available with the FOMA terminal during the operation with Bluetooth compatible keyboard. Switch the Input method to [5-touch]/[2-touch] for inputting the text with FOMA terminal (nP. 409). In this case, the operation with Bluetooth compatible keyboard is not available. Convenient operations in the text input screen are shown below.
PAGE 36
dv67_E.book 399 ページ２００９年４月２２日水曜日午後５時３３分 : When Bluetooth compatible car navigation system is not cooperated, location information is saved as send reservation data in the FOMA terminal. When the send reservation data is already saved, the confirmation screen asking whether to overwrite appears. The saved send reservation data is sent when Bluetooth compatible car navigation system is cooperated. Send reservation data is sent regardless of Function lock settings.
PAGE 37
dv67_E.book 400 ページ２００９年４月２２日水曜日午後５時３３分 • Enter up to 32 single-byte (16 double-byte) characters for a device name. Pictograms in the device name may not appear correctly for the other party’s Bluetooth device. ■ Setting time to search Bluetooth device 1 In the Custom menu, select [LifeKit]/[Bluetooth]/ [Bluetooth setting]/[Time-out To Search]. 2 Enter the search time/t.
PAGE 38
dv67_E.book 427 ページ２００９年４月２２日水曜日午後５時３３分 Overseas Use Outline of international roaming (WORLD WING) . . . . . . . . . . . . . . . . .428 Available services overseas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .429 Before use overseas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .430 Making a call at your country of stay. . . . . . . . . . . . . . . . . . . . . . . . . . . .432 Receiving a call overseas . . . . . . . . . . . . . . . . . . . . . .
PAGE 39
dv67_E.book 428 ページ２００９年４月２２日水曜日午後５時３３分 Country codes of major countries Outline of international roaming (WORLD WING) International roaming (WORLD WING) is a service that enables you, using overseas telecommunications carrier’s networks, to make calls and use i-mode. Use this FOMA terminal for voice/Videophone calls, i-mode and SMS with the phone number and mail address used in Japan. Network services such as Voice Mail and Call Forwarding Services can also be used.
PAGE 40
dv67_E.book 429 ページ２００９年４月２２日水曜日午後５時３３分 Available services overseas The available communication services overseas are as follows. Communication service 3G GSM GPRS Make or receive calls in your country of stay or make international calls to Japan or to other countries with the same phone number as used in Japan while abroad. A A A Make international Videophone calls to users of the specified 3G telecommunications carriers overseas and FOMA users in Japan.