User's Manual

17
Contents/Precautions
Do not place the handset near an air
conditioning vent.
Condensation formed due to rapid changes in
temperature may cause internal corrosion and lead
to malfunction.
Do not apply excessive force to the FOMA
terminal and battery pack when using
them.
Carrying the handset in a tightly packed bag or
sitting on the handset in your pocket may cause a
damage to display, other internal components or
battery pack or result in malfunction.
Keeping an external connector device plugged into
the external connector terminal or earphone/
microphone terminal may cause a damage to the
connector or result in malfunction.
Do not rub or scratch the display with
metal, etc.
May scratch the handset and cause malfunction or
damage.
Read the respective manuals or user’s
guides supplied with the battery pack and
adapters (including charger micro USB
adapter) carefully.
Do not forcefully press a surface of the
touch panel or operate with a pointed
object such as a fingernail, ballpoint pen,
pin, etc.
May damage the touch panel.
Avoid using the handset in extremely high
or low temperatures.
Use the FOMA terminal within the range of a
temperature between 5°C and 40°C (for
temperatures of 36°C or higher, such as in a room
with a bath, limit usage to a short period of time)
and a humidity between 45% and 85%.
Using the handset close to landline
phones, TVs or radios may have harmful
effects on the operation of such
equipment. Move as far away as possible
from such items before use.
Keep a separate memo and note
information stored in the FOMA terminal.
DOCOMO shall not be liable for any loss of content.
Do not drop or otherwise subject the
FOMA terminal to severe impact.
May damage the handset and cause malfunction.
When connecting an external connector
device to the external connector terminal
or earphone/microphone terminal, do not
put it in obliquely or do not pull it while it
is plugged in.
May damage the handset and cause malfunction.
The FOMA terminal becomes warm during
using or charging but this is not a
malfunction.
Do not leave the camera in direct sunlight.
May cause discoloration or burn-in.
Use the FOMA terminal with the external
connector terminal cover closed.
Dust, water and others enter inside and cause a
malfunction.
Notes about the FOMA terminal