User's Manual

38
Before Using the Handset
When the FOMA terminal is turned on, you can
charge the FOMA terminal by connecting the
FOMA terminal to a PC with the microUSB cable
for PC (sample).
Install the USB driver to the PC in advance. And
also enable USB battery charge (nP. 79).
Ʀ Refer to “Manual for USB Driver Installation” in
PDF format in http://k-tai.sharp.co.jp/support/d/
sh-13c/download/usb/index.html (in Japanese
only) for details on installing USB driver.
For details on connecting to a PC nP. 108
ɡ
Turning power ON
1
H (for at least 2 seconds)
ɡ
Turning power OFF
1
H (for at least 1 second)/[Power
off]
/[OK]
ɡ
Sleep mode
The screen is off and the sleep mode is activated
when H is pressed or the FOMA terminal is not in
use for a set length of time.
Press H in the sleep mode to deactivate the sleep mode.
ɡ
Touch panel lock
When the power is turned on or the sleep mode is
deactivated, the touch panel is locked.
Keep touching [J] and slide it up into [K] to unlock.
Key operation in touch panel unlock screen
To set/disable manner mode: y (for at least
1 second)
To turn off power: H (for at least 2 seconds)
Do not forcibly pull the external connector
terminal cover. May damage the cover.
Do not place objects near the FOMA terminal
when charging. May damage the FOMA
terminal.
When using a DC adapter
The DC adapter should only be used in
negative grounded vehicles (12 and 24V DC).
Do not use with the car engine shut off. May
drain the car battery.
The DC adapter fuse (2A) is a consumable. For
replacement, purchase a new fuse at a local
automobile supply shop.
Refer to the user’s guide of FOMA DC Adapter
01/02 for details.
Charging with microUSB cable
for PC
Turning power ON/OFF
If there is an unchecked missed call etc., an
icon is displayed on the unlock screen. If you
touch the icon before unlocking the touch
panel, the corresponding screen is displayed.