2012/7/3版 General Inquiries (Business hours: 9:00 a.m. to 8:00 p.m.) Repairs (Business hours: 24 hours (open all year round)) 0120-005-250 (toll free) ɦ Service available in: English, Portuguese, Chinese, Spanish, Korean. ɦ Unavailable from part of IP phones. (Business hours: 9:00 a.m. to 8:00 p.m.
Precautions (ALWAYS FOLLOW THESE DIRECTIONS) Before use, read these “Precautions” carefully and use your handset properly. Keep this manual in a safe place for future reference. These precautions contain information intended to prevent bodily injury to the user and to surrounding people, as well as damage to property, and must be observed at all times.
“Precautions” is explained in the following six sections. Handling the handset, battery pack, adapters, wireless charger and docomo mini UIM card (general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 7 Handling the handset . . . . . . . . . . . . . . . . . . P. 9 Handling battery pack . . . . . . . . . . . . . . . . . P. 11 Handling adapters and wireless charger. . . P. 12 Handling docomo mini UIM card. . . . . . . . . P. 14 Handling near electronic medical equipment . . . . . . . . . . . . .
Turn off the handset near high-precision electronic devices or devices that use weak electronic signals. May interfere with the operation of electronic devices. Take particular care with the following devices Hearing aids, implanted cardiac pacemakers, implanted cardioverter-defibrillators or other electronic medical equipment. Fire alarms, automatic doors, and other equipment controlled by electronic signals.
Keep the equipment out of the reach of young children. A young child may swallow the equipment or suffer other bodily injury. Be very careful when using the handset connected to adapters repeatedly or for long periods of time. The handset, battery pack or adapters may become warm if 1Seg etc. is used for a long time while charging. Touching high temperature areas for a prolonged period of time may cause skin irritations, itchiness or low-temperature burns in some people.
Do not shine the light at anyone driving a car or other vehicles. May prevent a driver from driving safely and cause a traffic accident. Turn off the handset in areas where the use of mobile phones is prohibited, such as in aircraft or hospitals. May interfere with the operation of electronic devices and electronic medical equipment. Follow the instructions given by the respective medical facilities regarding the use of mobile phones on their premises.
If the display is broken and the liquid crystal then leaks, do not get the liquid on your skin (face, hands, etc.). May result in loss of eyesight and harm to your skin. If the liquid comes into contact with your eyes or mouth, immediately rinse your eyes or mouth with clean water and see a doctor. If the liquid comes into contact with your skin or clothes, immediately wipe it off with alcohol, and wash with water and soap.
Warning If any trouble such as a deformation or scratches caused by dropping the battery pack is found, never use it. The battery pack may catch fire, explode, overheat or leak. If the battery pack leaks or emits an unusual odor, immediately stop using it and move it away from any naked flames or fire. The battery fluid is flammable and could ignite, causing a fire or explosion. Do not allow a pet to bite the battery pack. The battery pack may catch fire, explode, overheat or leak.
The surface of the handset uses the aluminium material. Note that dent and abrasion are easily remained as aluminium is a soft material. Notes about the battery pack The battery pack is a consumable product. Though usage time varies with use, change the battery if the battery level is extremely low even after being fully charged. Purchase a specified new battery pack. Charge battery in areas where ambient temperature is between 5°C and 35°C.
Always keep IC area clean. Clean only with a soft and dry cloth (such as the type used for eyeglasses). Keep a separate memo and note information stored in the docomo mini UIM card. Radio frequencies The radio frequencies the Bluetooth function of the handset uses are as follows. ӱġ Ӳġ ӳġ DOCOMO shall not be liable for any loss of content. To protect the environment, please take any unneeded docomo mini UIM cards to a docomo Shop or retailer. Do not damage, touch haphazardly or short-circuit the IC.
Notes about wireless LAN (WLAN) Wireless LAN (WLAN) uses radio waves to communicate information. Therefore, it has an advantage of freely connecting to the LAN within the service area. On the other hand, if security setting is not set, it is possible for a malicious third party to intercept the communication contents or hack. It is recommended to set security setting at your own risk and judgement.
2. If the device causes harmful radio interference to the in-house radio stations for a mobile object identifier, immediately change the radio frequency or stop use, and contact the number listed in “General Inquiries” on the back of this manual for crosstalk avoidance, etc. (e.g. partition setup). 3.
Removing microSD Card 1 Remove the back cover (nP. 23) 2 Gently push the microSD Card towards inside (1) : Push the microSD Card until it clicks. It will eject towards you. Pulling it forcibly may damage the handset or the microSD Card. the battery pack 2 Attach : With the recycle mark side turned up, place the connector terminal of the handset to that of the battery pack and attach the battery pack.
Charging The battery pack is not fully charged at the time of purchase. Be sure to charge the battery before use. It is recommended that the accompanying wireless charger be used for charging to prevent water from seeping or dust from getting in caused by forgetting to close the external connector terminal cover (nP. 35).
If you watch 1Seg etc. while charging for a long time, the service life of the battery pack may become shorter than estimated. Part names are as followings. Charging information (five LEDs) Charging assist button AC adapter and DC adapter Refer to user’s guide of FOMA AC Adapter 01/ 02, FOMA AC Adapter 01 for Global use (sold separately), FOMA DC Adapter 01/02, AC Adapter 03 (sold separately) or DC Adapter 03 (sold separately). FOMA AC Adapter 01 covers only 100V AC.
When noises interfere on a TV, radio set, etc. during its use, use the wireless charger after distancing it as far away from a TV, radio set, etc. as possible. When charging, keep the wireless charger at least 30 cm away from wireless charging compatible devices other than the handset/ battery pack to charge. Otherwise the handset/ battery pack to charge may not be detected and thus may not be charged. The quality of calls or reception status of 1Seg etc. may deteriorate while the handset is being charged.
3 When inserting the AC adapter power plug into an outlet (2) or inserting the DC adapter power plug into a car cigarette lighter socket, the charging illumination illuminates and charging starts Power plug 100V AC outlet Power plug Pull the adapter out of the outlet or cigarette lighter socket if it will not be used for a long time.
Charging with Micro USB Cable 01 When the handset is turned on, you can charge the handset by connecting the handset to a PC with Micro USB Cable 01 (sold separately). Install the USB driver to the PC in advance. If the USB driver has not been installed on the PC, you cannot charge the battery by connecting the handset to the PC via Fast transfer mode. Ʀ For details on installing USB driver, refer to “Manual for USB Driver Installation” in PDF format in the following site. (http://k-tai.sharp.co.
Basic operation Operation of touch panel You can operate by touching the touch panel (display) directly with your finger. Operations differ depending on the function and screen in use. Touch Touch a key or an item displayed on the screen to select or set it. 1 Put your finger on the touch panel and put it off Cautions when using the touch panel The touch panel is designed to be lightly touched with your finger.
Flick Flick your finger to the left/right in the home screen etc. to switch pages. 1 Move your finger like sweeping the touch panel Pinch out/Pinch in Pinch out/Pinch in while displaying an image etc. to zoom in/out. 1 Put two fingers on the touch panel and slide them with putting a distance between two fingers apart (pinch out)/closer (pinch in) Operation while using function Navigation keys Use the navigation keys displayed at the bottom of the screen to perform the basic operations.
mopera U mopera U is an ISP owned by NTT DOCOMO. If you subscribe to mopera U, you can use Internet with simple setting. mopera U is a paid service that requires subscription. Setting mopera U 1 In the home screen, [R]/ [Settings]/[Network settings]/ [Mobile networks]/[Access Point Names]/[mopera U]/[mopera U ୭ ] (mopera U settings) mopera U ୭ (mopera U settings) is an access point for mopera U settings.
: If you select an access point not protected by security, it is automatically connected. : If you select an access point protected by security, enter the password (security key). : WPS compatible access points can be easily registered. Select an item in Setup and register an access point. : To register access points manually: [ADD NETWORK]/enter the network SSID/set security/[Save] : Alternatively, select [AOSS] to connect to an access point.
[Configure Wi-Fi hotspot] At the time of purchase, Network SSID is set to [SH- D_AP] and Security is set to [WPA2 PSK] while Password is set randomly. Change the settings if necessary. Setting up mail account the home screen, [R]/[Email] 1 In: Only when an account is not set, the account setting screen appears. 2 Enter mail address and password/ [Next] : Provider information is preset for some mail accounts, and a receiving mail server and a sending mail server are automatically set.
Call Making a call 1 In the home screen, [R]/ [Phone]/[Dial] a phone number 2 Enter : Always enter the city code, even when it is a local number. : You can set to notify/not to notify the other party of your phone number for each call by adding “186”/“184” to the head of the phone number. 3 Outgoing/Incoming call history 4 Favorites Display the contacts set to [Favorites] by groups. 5 Dial Display the dial screen.
The handset supports “Location notification of emergency call”. When dialing an emergency number such as 110, 119, and 118, the information of your location (location information) is automatically notified to the agency that received the emergency call (e.g. the police station). Depending on your location and the reception status of the signal, the agency that received the emergency call may not be able to confirm the exact location.
[Calling Method] When calling to a land-line phone: 010/ country code/area code (city code)/the other party’s phone number/[0] When calling to a mobile phone: 010/country code/the other party’s phone number/[0] Ʀ For the other parties’ phone numbers and area codes (city codes) that begin with “0”, omit the “0” when entering (except some countries or regions such as Italy). Ʀ Alternatively, enter “009130-010” as usual or “+” instead of “010”.
Infrared communication Using infrared communication Use infrared communication to send and receive data to and from other handsets which also support infrared communication. Send and receive phonebooks, sp-mode mails, profiles, business cards, memos, schedules, bookmarks, ToruCa, data shot by camera, data in Gallery, data recorded with the voice recorder, etc. The handset infrared communication function complies with IrMC™ 1.1 standard.
Receiving all data is not available depending on the data type. When using g iC communication When available space in the save destination becomes insufficient, the data being received to that point are saved and receiving ends. iC communication Using iC communication You can send and receive data with other handsets equipped with iC communication function. Make initial setting of Osaifu-Keitai in advance (nP. 121). In the following cases, you cannot perform iC communication.
Sending data Example: Still picture 1 In the home screen, [R]/[SH tool]/[Recommendation]/ [Contents manager] 2 Touch a still picture for a while/ [Share]/[Send by IC] 3 [Ok] 4 Place the a mark on that of the other party’s handset Receiving data 1 Place the a mark on that of the other party’s handset 2 [Accept] 3 Drag the status bar down/select received data Bluetooth function You can connect the handset to Bluetooth devices wirelessly.
*4 Connect a commercially available Bluetooth compatible hands-free device such as a car navigation system to the handset to talk during hands-free operation using the car navigation system etc. *5 Connect a commercially available Bluetooth compatible audio device to the handset to play music, audio of 1Seg, etc. wirelessly. Also, remote control operation may be available from Bluetooth devices. However, compatible devices are limited depending on the data type.
Wireless connection is available with Bluetooth device put in a bag or pocket. However, lowering of communication speed or noise may result when you are in between the Bluetooth device and the handset. Electromagnetic signals from the Bluetooth device may affect the operation of electronic medical equipment etc. As some cases may result in accident, turn off the handset and other Bluetooth devices in the following place.
When the Bluetooth function is enabled, the handset is set to receive a registration request/ connection request from other Bluetooth devices. Perform the setting for displaying the handset’s information on the other party’s Bluetooth device in advance to allow the handset to be searched for by other Bluetooth devices. While in connection stand-by, even if a connection request from a Bluetooth device is received, connection may not be made depending on the signal status etc.
Sending and receiving by Bluetooth Sending data Example: Still picture 1 In the home screen, [R]/[SH tool]/[Recommendation]/ [Contents manager] 2 Touch a still picture for a while/ [Share]/[Bluetooth] : Set the receiver’s Bluetooth device to receive data.
Receivers do not emit sounds in the following cases even when the FM transmitter is enabled. During a call During an incoming call Adjust the volume on the handset or the receiver when it is emitting sounds via the FM transmitter. Also, when you terminate the FM transmitter function, make sure that the volume of the handset and the receiver are not too loud before the termination.
1 Connect the handset to a PC via Micro USB Cable 01 : The USB mass storage screen appears. If the screen does not appear, drag the status bar down and select [USB connected]. on USB storage] 2 [Turn : When the confirmation screen is displayed, check the content and select [OK].
4 Perform device removal by MediaJet afterr use 5 Disconnect Micro USB Cable 01 from the handset Install MediaJet (nP. the nP. 113) and enable e dvance (nP. 45). Wi-Fi function in advance Preparation for automatic connection while charging Settings on the handset side Transferring data by Wi-Fi function Enable the Wi-Fi function in advance (nP. 45).
Automatic transference while charging Prepare for automatic connection while charging in advance. Automatic transference is available while charging with the wireless charger. 1 Activate MediaJet on a PC charging 2 Start : The handset is connected to MediaJet automatically and transference starts. 3 Perform device removal by MediaJet after use USB host function The USB host function is installed in the handset.
MHL™ cable Two types of microUSB plug shape are available. When connecting an MHL™ cable, insert it securely. Inserting or removing it forcibly may damage the external connector terminal or connector or result in a malfunction. When removing the plug, hold the plug and remove it slowly. Connect the MHL™ cable to the HDMI input terminal of a TV. Wireless output You can display the same screen as that of the handset on the TV by connecting the handset to a TV with a wireless connection function.
Osaifu-Keitai Osaifu-Keitai is a function which has built-in IC card and allows you to pay, use as coupons or collect stamps by simply holding the handset over the scanning device at stores. Moreover, you can access sites and web pages by holding the handset over the scanning device, and get the latest coupon, deposit electronic money and check your usage by using communication. In addition, for your secure use, you can lock functions of Osaifu-Keitai when you lost the handset.
Holding over scanning device Hold the a mark of the handset over the scanning device to use as electronic money or railway tickets, to retrieve ToruCa, etc. Pay attention to the following points when holding the a mark over the scanning device.
International Roaming Outline of international roaming (WORLD WING) International roaming (WORLD WING) is a service that enables you to use the same phone number and mail address of the handset as you use in Japan in the service area of DOCOMO affiliated overseas network operators without changing your phone number and mail address. You can use calls and SMS without any changes in settings. Available network The handset is rated as class 4.
Charge Overseas charges (call charges, packet communication charges) differ from those in Japan. Since some applications automatically perform packet communication, the packet communication charges may be higher. Contact the application provider for the operation of each application. Set before departure Network service settings If you subscribed to network services, network services such as Voice Mail Service, Call Forwarding Service and Caller ID Display Request Service are available from overseas.
Inquiries When the handset or the docomo mini UIM card is lost or stolen overseas, promptly contact DOCOMO and conduct a procedure for canceling the use of service from your country of stay. Refer to the back of this manual for inquiries. Note that communication/call charges after the handset or the docomo mini UIM card is lost or stolen are incurred to the subscriber. For land-line phone, etc.
Network operators Search for networks and set a network operator to use. 1 In the home screen, [R]/ [Settings]/[Network settings]/ [Mobile networks]/[Network operators] : If the confirmation screen for data communication is displayed, check the content and select [OK]. : Search for networks and a list of network operators is displayed.
Setting of International Dial Assist 1 In the home screen, [R]/ [Settings]/[Call]/[Roaming settings]/[International dial assist] Select an item 2 Automatic conversion function: Set whether to make calls using International Dial Assist. Country code: Set country code to use when using International Dial Assist. International prefix: Set international prefix to use when using International Dial Assist.
Total shooting time of 1 GB microSD Card Normal Fine High Quality FULL HD: 1920×1080 Approx. 13 min Approx. 11 min Approx. 8 min HD: 1280×720 Approx. 41 min Approx. 32 min Approx. 21 min VGA: 640×480 Approx. 135 min Approx. 86 min Approx. 64 min QVGA: 320×240 Approx. 866 min Approx. 602 min Approx. 324 min Recording time of voice recorder Number of entries Handset memory Up to 223 (7.8 GB)* Recording time Up to approx. 1,338 hr * Each recording time is up to approximately 6 hours.
This mobile phone can be used in positions other than against your ear. This mobile phone satisfies the international guidelines when used with a carrying case or a wearable accessory approved by NTT DOCOMO, INC. (*2). In case you are not using the approved accessory, please use a product that does not contain any metals, and one that positions the mobile phone at least 1.5 cm away from your body.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They note that if you want to reduce your exposure then you can do so by limiting the length of calls or using a hands-free device to keep the mobile phone away from the head. * The tests are carried out in accordance with international guidelines for testing. Declaration of Conformity This declaration relates to the handset only.
FCC RF Exposure Information Your handset is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
When you use Flash Player, you shall agree with following conditions: (i) a prohibition against distribution and copying, (ii) a prohibition against modifications and derivative works, (iii) a prohibition against decompiling, reverse engineering, disassembling, and otherwise reducing the software to a human-perceivable form, (iv) a provision indicating ownership of software by Partner and its suppliers, (v) a disclaimer of indirect, special, incidental, punitive, and consequential damages, and (vi) a discla