Operation Manual

32
Call
SH-08E_E_04.fm
[32/36]
The caller ID may not be notified or displayed correctly
depending on overseas network operators. In this case, making
a call with incoming call history is not available.
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
: If you press x/y during an incoming call, you can stop the
ringtone, vibrator or flash of the incoming lamp.
2
Receive the call
: Operate after touching [Activate].
1 Reject call with SMS
You can reject an incoming call and send a selected SMS
message to the other party.
2 Reject
You can reject the incoming call.
3 Accept
You can receive the call.
3
[End] to end the call
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[z]/[On hold]
1
When a call is received, the ringtone sounds
and the incoming lamp flashes
2
[z]/[Absence Memo]
Playing an answering memo
1
In the home screen, [R]/[Phone]/[z]/[Call
settings]
2
[Call/Ans Memo]/[Answering Memo List]/
select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the using
condition during a call.
1 Add call
*
Place a current call on hold and make a call to another party.
2 End
End a call.
3 Dialpad
You can enter touch-tone signals.
4 Hold
Hold/Unhold a current call.
If you have added a call, [Switch] is displayed. Touch it to
switch to whom you talk.
5 Mute
Enable or disable mute setting on a current call.
6 Speaker
When an earphone/microphone or a Bluetooth device is
connected, you can switch sound emitting parts.
* Subscription to Call Waiting Service is required.
1
x/y during a call
1
[z] during a call/[Sound Memo]
2
[Stop]
: Operate after touching [Activate].
1
[z] during a call/[Profile]
The system memory keeps a record of the 50 most recent
outgoing and incoming call histories in total.
1
In the home screen, [R]/[Phone]/[Recent
calls]/[Outgoing]/[Incoming]
2
Select a history
[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party’s phone number/[0]
When calling to a mobile phone: 010/country code/the other
party’s phone number/[0]
･ As for the other parties’ phone numbers and area codes (city
codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
･ Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
Receiving a call
Placing a call on hold
Answering by answering memo
Incoming lamp
Operation during a call
Note the following when using hands-free.
･ Speak approximately $$ to $$ cm away from the microphone.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･ When calling outdoors, in a location where surroundings are
noisy and where the sound echoes loudly, use an earphone/
microphone.
･ If the sound breaks up during a hands-free call, lower the
in-call volume.
Adjusting the in-call volume
Sound Memo
Checking your own phone number
Outgoing/Incoming call history
Outgoing history list screen
SH-08E_E_04.fm 32 ページ ２０１３年７月１日 月曜日 午後１時５３分