Operation Manual

73
Data Communication
SH-08E_E_09.fm
[73/75]
*8 Set the virtual connection with a serial cable and interconnect
between devices.
*9 Transfer phonebook data on the system memory to a Bluetooth
device. Data may not be displayed correctly on the other party’s
device depending on the contents of the transferred phonebook
data.
*10 Join a PC network etc. and share the Internet connection.
*11 Communicate data with a commercially available health
appliance compatible with Bluetooth such as a weighing
machine.
*12 Make a Bluetooth device ring or vibrate when the Bluetooth
connection is terminated after it is moved away from the tablet.
*13 Make the tablet/a Bluetooth device ring or vibrate by operating
the tablet/the Bluetooth device.
*14 Notify you of incoming calls, new mails, etc. through a
Bluetooth device.
*15 Stop the ringtone or the vibrator of the tablet by operating a
Bluetooth device.
*16 Synchronize clocks between a Bluetooth device and the tablet.
To register/connect a Bluetooth device, the Bluetooth passkey
may need to be entered. Before starting the registration, decide
one- to sixteen-digit number. Enter the same number on the
tablet and the other party’s Bluetooth device.
Set the other party’s Bluetooth device to the registration stand-by
status in advance.
1
In the home screen, [R]/[Settings]/
[Bluetooth]
2
Slide [OFF] to the right
3
Select a Bluetooth device/[Pair]
: The confirmation screen for connection may be displayed.
: Entering the Bluetooth passkey may be necessary
depending on the other party’s Bluetooth device. Also, some
Bluetooth devices may start connecting after completing
registration.
: To display/hide the tablet’s name on other Bluetooth devices:
[SH-08E]
･ The tablet name is automatically hidden when the period of
time set for Visibility timeout has passed.
: To search for Bluetooth devices: [SEARCH FOR DEVICES]
: Touch [B] of a paired Bluetooth device to change the name
and the connection type of the other party’s Bluetooth device.
1
Registration request/Connection request from
Bluetooth device
2
Drag the status bar down/[Pairing request]/
[Pair]
: When the confirmation screen about the settings on pairing
appears, select [Pair].
: Entering the Bluetooth passkey may be necessary
depending on the other party’s Bluetooth device.
: The confirmation screen for connection may be displayed.
1
In the Bluetooth screen, [B] of the Bluetooth
device to unregister/[Unpair]
Refer to the manual for the Bluetooth device as well.
You may not hear TV audio etc. with Bluetooth devices which
are not compatible with SCMS-T.
Precautions about handling the Bluetooth device
Note the followings when using the Bluetooth device.
Note the followings to make good connection.
 Keep the distance between the tablet and another
Bluetooth device within approximately 10 m with no
obstructions in sight. The distance within which you can
make connection may be shorter when there are
obstructions between them or depending on the conditions
of the surroundings (such as walls or furniture) and the
structure of a building. Especially when there is a wall or
floor of reinforced concrete between them, they may be
unable to connect with each other. Note the above
mentioned distance is not guaranteed.
 Move the tablet and another Bluetooth device as far away
as possible from home electric appliances, AV devices, OA
devices, etc. before connection. The Bluetooth device is
liable to be adversely affected by a microwave oven, so
move it as far away as possible from the microwave oven
while using it. Otherwise, normal connection cannot be
performed when other electric devices are powered on or
Bluetooth devices may cause noises or reception failure on
a TV or radio set.
 Move the Bluetooth device to a place where connection is
possible when there is a broadcast station or radio near the
Bluetooth device and the tablet cannot be connected to the
device. Strong radio waves may prevent connection
between Bluetooth devices.
 Wireless connection is available with Bluetooth device put
in a bag or pocket. However, lowering of communication
speed or noise may result when you are in between the
Bluetooth device and the tablet.
Electromagnetic signals from the Bluetooth device may affect
the operation of electronic medical equipment etc. As some
cases may result in accident, turn off the tablet and other
Bluetooth devices in the following place.
 On trains  On airplanes  In hospitals
 Near automatic doors or fire alarms
 In places such as gas stations where flammable gas is
generated
The radio interference with Wi-Fi compatible devices
The Bluetooth devices use the same frequency band (2.4
GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using
the Bluetooth device near a wireless LAN device may cause
the radio interference, lowering of communication speed,
noise or connection failure. In this case, turn off the wireless
LAN device or keep the tablet and the Bluetooth device at
least approximately 10 m away from the wireless LAN.
Bluetooth
If you fail to connect, connection may become available after
re-registration of Bluetooth devices.
When the Bluetooth function is set to [ON], the tablet is set to
receive a registration request/connection request from other
Bluetooth devices. Make the setting for displaying the tablet’s
information on other Bluetooth devices in advance to allow the
tablet to be searched for by other Bluetooth devices.
While in connection stand-by, even if a connection request from
a Bluetooth device is received, connection may not be made
depending on the signal status etc.
For details on the operations of the other party’s Bluetooth
device, refer to the manuals of the Bluetooth device to be used.
When receiving registration request from
Bluetooth device or connection request from
unregistered Bluetooth device
Disabling registration of Bluetooth device
SH-08E_E.book 73 ページ ２０１３年６月２８日 金曜日 午後３時７分