User's Manual

33
Safety Precautions
•
If liquid such as water is splashed onto the product
with the external connection jack cover, back cover,
au Micro IC Card (LTE) cover or microSD memory
card cover opened, the liquid may seep inside and
cause electric shock or fault. Stop using it, turn off
the power and then contact an au shop near you or
Secure cell phone support center.
•
When the product is wet, wipe it with a dry and clean
cloth.
•
When your hand or the product is wet, never open/
close the external connection jack cover, au Micro IC
Card (LTE)/microSD memory card cover.
•
The product is resistant to fresh and tap water at
room temperature (5°C to 35°C) only.
•
Do not use the earphone when any jack is wet or
sand or dust is attached to it. Doing so may cause
fault such as impairment of the waterproof/dustproof
property.
■ Dustproof property of the product
•
The dustproof property of the product only
guarantees a pr
otection rating equivalent to IP5X and
does not guarantee its performance under other
using conditions such as when the product is directly
put on sand such as a beach.
•
If dust is attached to the product, immediately wash it
away with water or otherwise clear it completely
before use.
■ Notes on Using the Product
•
Do not let the product get wet with or submerged into
the following liquids.
･ Water containing soap, detergent or bath powder
･ Seawater or water from a swimming pool
･ Hot spring, hot water, etc.
•
If the product gets wet with seawater, water from a
swimming pool, soft drink, etc. or dust, sand, mud,
etc. is attached on the product, immediately wash it
away. When it gets dry and coagulated on the
product, the stains get hard to get rid of and may
cause fault.
•
Using the product without completely washing sand
or mud away may cause fault such as scratches and
damages on the product.
•
Do not immerse the product in a bathtub or swimming
pool. Also, do not use it under water. (including key
operations.)
•
The product is not designed to withstand high water
pressure. Do not expose the product to a strong
water flow with tap water, shower, etc. (6 liters/min or
more) or submerge it under water.
•
To prevent condensation, wait until the product
reaches room temperature before you bring it from a
cold place into a warm place. If condensation occurs,
leave it in room temperature until the condensation is
removed.