User's Manual

36
Safety Precautions
•
Do not splash water onto the desktop holder among
the packaged items, specified charger (sold
separately) or optional accessories when using the
equipment. Do not use the equipment in places
where water is regularly used such as a bathroom,
shower room, kitchen and lavatory. Doing so may
cause fire or electric shock.
■ Washing the Product
If any stain, dust, sand, soft drink, etc. is attached to
the surface of the product, gently wipe it off with a cloth
and wash the product under a mild water flow (up to 6
liters/min) of tap water at room temperature (5°C to
35°C) approximately 10 cm away from the faucet or
shower head.
Hold the external connection jack cover and au Micro
IC Card (LTE)/microSD memory card cover so that they
do not open, and wash the product with your hands
without using a brush or sponge. After washing the
product, drain water off and then use the product.
•
Make sure that the external connection jack cover, au
Micro IC Card (LTE)/microSD memory card cover are
securely closed before washing the product.
•
Do not wash the product with a washing machine or
an ultrasound bath.
•
The earphone/microphone jack section is especially
subject to stain such as dust or sand adhesion. Wash
away stain carefully so as not to keep it remaining in
the section. Also, after washing it away, make sure
the section gets suf
ficiently dried off before using the
product. Using the product with sand or water drops
remaining in the jack sections may cause fault.
•
When cleaning the earphone/microphone jack
section, do not use tools such as a cotton swab or
jam a cloth into the jack section. Doing so may cause
fault such as impairment of waterproof/dustproof
property.
•
Never put the product in a microwave oven for drying
it. Doing so may cause the internal battery to leak
liquid, overheat, rupture or ignite. Also, doing so may
cause the product to overheat, emit smoke, ignite or
cause destruction of circuit components.
•
Do not expose the product to hot air from a hair dryer
or leave it in a high temperature environment for
drying it. Doing so may cause the product to deform,
discolor, get out of order, etc.