User's Manual

47
205SHPL03.fm
[47/53]
Quick Tips
Charge handset before powering on for the first
time (not adequately charged at time of
purchase).
. Handset may not power on when charge is low.
. If handset does not power on even after
charging, contact a SoftBank Shop.
. SD/USIM Card Insertion/Removal Tool
(complimentary sample)
. AC Charger (SHCEJ1)
. microSD Card (complimentary sample)
(Battery is built into handset.)
. AC Charger is not water proof. Never charge
handset while it is wet; may cause fire or
damage due to electric shock or short circuit.
. Handset/AC Charger may become warm
while charging.
A Insert Micro USB plug into
External Device Port
. Insert Micro USB plug in correct
orientation; otherwise, External Device
Port may be damaged. Confirm contours
and orientation of Micro USB plug, then
insert it with tabs 1 on slot 2 side facing
down.
B Extend blades and plug AC
Charger into AC outlet
. Place thumb on dent and rotate blades
out as shown.
. Notification Lamp illuminates while charging.
. Notification Lamp goes out when charge
is full.
Before Using Handset
Accessories
Charging (AC Charger)
External
Device Port
Notification Lamp
AC 100 V Outlet
AC
Charger
Blades
Micro USB Plug
Micro USB Plug
External
Device Port
DentBlades
205SH_PL.book 47 ページ ２０１３年５月９日 木曜日 午後１時２９分