User Manual

33
Call
SH-02F_E_04.fm
[33/37]
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
: If you press x/y during an incoming call, you can stop the
ringtone, vibrator or flash of the incoming illumination.
2
Receive the call
: Operate after touching [Activate].
1 Reject call with SMS
You can reject an incoming call and send a selected SMS
message to the other party.
2 Reject
You can reject the incoming call.
3 Accept
You can receive the call.
3
[End] to end the call
■ Placing a call on hold
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
2
[z]/[On hold]
■ Answering by answering memo
1
When a call is received, the ringtone sounds
and the incoming illumination flashes
2
[z]/[Absence Memo]
Playing an answering memo
1
In the home screen, []]/[z]/[Call settings]
2
[Call/Ans Memo]/[Answering Memo List]/
select an answering memo
You can carry out operations such as using a hands-free call
and adjusting the in-call volume according to the using
condition during a call.
1 Add call
*
Place a current call on hold and make a call to another party.
2 End
End a call.
3 Dialpad
You can enter touch-tone signals.
4 Hold
Hold/Unhold a current call.
If you have added a call, [Switch] is displayed. Touch it to
switch to whom you talk.
5 Mute
Enable or disable mute setting on a current call.
6 Speaker
You can talk with hands-free.
When a Bluetooth device is connected, you can switch sound
emitting parts.
* Subscription to Call Waiting Service is required.
■
Adjusting the in-call volume
1
x/y during a call
■ Voice memo
1
[z] during a call/[Sound Memo]
2
[Stop]
: Operate after touching [Activate].
■
Checking your own phone number
1
[z] during a call/[Profile]
The handset memory keeps a record of the 500 most recent
outgoing and incoming call histories in total.
1
In the home screen, []]/[Recent calls]/
[Outgoing]/[Incoming]
2
Select a history
[Calling Method]
When calling to a land-line phone: 010/country code/area
code (city code)/the other party’s phone number/[0]
When calling to a mobile phone: 010/country code/the other
party’s phone number/[0]
･ As for the other parties’ phone numbers and area codes (city
codes) that begin with “0”, omit the first “0” when entering
(except some countries or regions such as Italy).
･ Alternatively, enter “009130-010” as usual or “+” instead of
“010”.
Receiving a call
Operation during a call
Incoming illumination
Note the following to use hands-free.
･ Speak approximately 20 to 40 cm away from the mouthpiece.
When the surroundings are noisy, the sound may break up
and the call may not be satisfactory.
･ When calling outdoors, in a location where surroundings are
noisy and where the sound echoes loudly, use an earphone/
microphone.
･ If the sound breaks up during a hands-free call, lower the
in-call volume.
Outgoing/Incoming call history
Outgoing call history list screen
SH-02F_E.book 33 ページ ２０１３年１２月１０日 火曜日 午前１１時４８分