User's Manual

36
303SHPL02.fm
[36/45]
Charge handset before powering on for the first
time (not adequately charged at time of purchase).
. Handset may not power on when charge is low.
. If handset does not power on even after
charging, contact a SoftBank Shop.
. AC Charger (SHCEJ1)
. microSD Card (complimentary sample,
preinstalled)
(Battery is built into handset; handset back
cover is not removable.)
A Insert Micro USB plug into
External Device port
. Insert Micro USB plug in correct
orientation; otherwise, External Device
port may be damaged. Confirm contours
and orientation of Micro USB plug before
inserting it.
B Extend blades and plug AC
Charger into AC outlet
. Check that Notification Lamp illuminates
red (Notification Lamp illuminates green
when charge is almost full).
. Notification Lamp goes out when charge
is full.
C After charging, remove Micro USB
plug from External Device Port,
then unplug AC Charger and
retract blades
Quick Tips
Before Using Handset
Accessories
Charging (AC Charger)
Notification Lamp
Blades
AC
Charger
Micro USB Plug
External
Device Port
AC 100 V Outlet
303SH_PL.book 36 ページ ２０１３年１２月２７日 金曜日 午前１０時２５分