User Manual

ManualsBrandsSharp ManualsCell PhonesCellular Phone

Data Communication

To register/connect a Bluetooth device, the Bluetooth passkey

may need to be entered. Before starting the registration, decide

one- to sixteen-digit number. Enter the same number on the

handset and the other party’s Bluetooth device.

Set the other party’s Bluetooth device to the registration stand-by

status in advance.

In the home screen, [R]/[Settings]/

[Bluetooth]

Slide [OFF] to the right

Select a Bluetooth device/[Pair]

: The confirmation screen for connection may be displayed.

: Entering the Bluetooth passkey may be necessary

depending on the other party’s Bluetooth device. Also, some

Bluetooth devices may start connecting after completing

registration.

: To display/hide the handset’s information on other Bluetooth

devices: [SL050]

Ʀ The handset’s information is automatically hidden when

the period of time set for Visibility timeout has passed.

: To search for Bluetooth devices: [SEARCH FOR DEVICES]

: Touch [B] of a paired Bluetooth device to change the name

and the connection type of the other party’s Bluetooth device.

ɡ When receiving registration request from Bluetooth

device or connection request from unregistered

Bluetooth device

Registration request/Connection request from

Bluetooth device

Drag the status bar down/[Pairing request]/

[Pair]

: When the confirmation screen about the settings on pairing

appears, select [Pair].

: Entering the Bluetooth passkey may be necessary

depending on the other party’s Bluetooth device.

: The confirmation screen for connection may be displayed.

ɡ Unregistering Bluetooth device

In the Bluetooth screen, [B] of the Bluetooth

device to unregister/[Unpair]

ɡ Disconnecting Bluetooth device

In the Bluetooth screen, select the Bluetooth

device to disconnect/[OK]

ɡ Setting Bluetooth

Set after setting the Bluetooth function to [ON].

In the Bluetooth screen, [z]

Select an item

 Rename phone: Change the handset’s name.

 Visibility timeout: Set how long the handset’s information will

be displayed on the other party’s Bluetooth device.

 aptX: Set whether to use aptX

 Handsfree setting: Set whether to always have voices

emitted from the connected Bluetooth compatible hands-free

device during a voice call.

 BT Smart setting: Enable/Disable the BT Smart settings.

 Show received files: Display the history of data received via

Bluetooth connection.

Precautions about handling Bluetooth devices

Note the followings when using Bluetooth devices.

Note the followings to make good connection.

 Keep the distance between the handset and another

Bluetooth device within approximately 10 m with no

obstructions in sight. The distance within which you can

make connection may be shorter when there are

obstructions between them or depending on the conditions

of the surroundings (such as walls or furniture) and the

structure of a building. Especially when there is a wall or

floor of reinforced concrete between them, they may be

unable to connect with each other. Note the above

mentioned distance is not guaranteed.

 Move the handset and another Bluetooth device as far away

as possible from home electric appliances, AV devices, OA

devices, etc. before connection. Bluetooth devices are liable

to be adversely affected by a microwave oven, so move

them as far away as possible from the microwave oven

while using them. Otherwise, normal connection cannot be

performed when other electric devices are powered on or

Bluetooth devices may cause noises or reception failure on

a TV or radio set.

 Move the Bluetooth device to a place where connection is

possible when there is a broadcast station or radio near the

Bluetooth device and the handset cannot be connected to

the device. Strong radio waves may prevent connection

between Bluetooth devices.

 Wireless connection is available with Bluetooth devices put

in a bag or pocket. However, lowering of communication

speed or noise may result when you are in between the

Bluetooth device and the handset.

Electromagnetic signals from Bluetooth devices may affect the

operation of electronic medical equipment etc. As some cases

may result in accident, turn off the handset and other Bluetooth

devices in the following place.

 On trains  On airplanes  In hospitals

 Near automatic doors or fire alarms

 In places such as gas stations where flammable gas is

generated

Radio interference with Wi-Fi compatible devices

The Bluetooth devices use the same frequency band (2.4

GHz) as wireless LANs (IEEE 802.11b/g/n). Therefore, using a

Bluetooth device near a wireless LAN device may cause the

radio interference, lowering of communication speed, noise or

connection failure. In this case, turn off the wireless LAN

device or keep the handset and the Bluetooth device at least

approximately 10 m away from the wireless LAN.

Using Bluetooth function

You can connect up to seven Bluetooth devices at the same

time. Bluetooth devices may not work properly or the number of

Bluetooth devices which can be connected at the same time

may differ depending on the profile.

If you fail to connect, connection may become available after

re-registration of Bluetooth devices.

When the Bluetooth function is set to [ON], the handset is set to

receive registration requests/connection requests from other

Bluetooth devices. Make the setting for displaying the handset’s

information on other Bluetooth devices in advance to allow the

handset to be searched for by other Bluetooth devices.

While in connection stand-by, even if a connection request from

a Bluetooth device is received, connection may not be made

depending on the signal status etc.

For details on the operations of the other party’s Bluetooth

device, refer to the manuals of the Bluetooth device to be used.