Operation Manual

7
Contents/Precautions
Tablet
Always use the specified power supply and
voltage.
When using overseas, use the AC adapter that is
available overseas.
Using the incorrect voltage may cause fires, burns or
electric shock.
AC adapter: 100V AC
DC adapter: 12/24V DC (for negative grounded vehicles
only)
AC adapter available overseas: 100 to 240V AC (Connect
only with a household AC outlet)
If the fuse in the DC adapter blows, always replace
it with a fuse of the specified type.
May cause fires, burns or electric shock. Refer to the
respective manuals for information on the correct fuse
specifications.
Wipe off any dust on the power plug.
May cause fires, burns or electric shock.
Fully plug the AC adapter into the outlet.
May cause fires, burns or electric shock.
Always grasp the adapters when unplugging the
power plug from the outlet or cigarette lighter
socket. Do not forcibly pull by the cord of the
adapter.
May cause fires, burns or electric shock.
When plugging/unplugging an adapter into/from
the tablet, plug/unplug the adapter horizontally and
straightly, not applying excessive force on it.
May cause fires, burns, bodily injury or electric shock.
Unplug the power plug from the outlet or cigarette
lighter socket when not using for a long time.
May cause fires, burns or electric shock.
Should water or other liquids enter the equipment,
remove the power plug from the outlet or cigarette
lighter socket immediately.
May cause fires, burns or electric shock.
Always unplug the power plug from the outlet or
cigarette lighter socket before cleaning the
equipment.
May cause fires, burns or electric shock.
Handling miFUR 6IM card
Caution
Be careful with the cutting surface when handling
the miFUR 6IM card.
May cause bodily injury.
Handling near electronic medical equipment
Warning
If you have electronic medical equipment such as
an implanted cardiac pacemaker or an implanted
cardioverter-defibrillator, always carry or use your
tablet at least 15 cm away from your implant.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
Patients receiving medical treatment away from a
hospital or medical facility (e.g. home treatment)
who are using electronic medical equipment other
than implanted cardiac pacemakers or implanted
cardioverter-defibrillators should consult the
respective manufacturers for information regarding
the effects of signals on the equipment.
Electromagnetic signals may have harmful effects on the
operation of the electronic medical equipment.
If there is any chance that the distance between the
tablet and a person closest to you may get shorter
than 15 cm such as when you cannot freely move
around, set the tablet not to emit radio wave in
advance (by setting Airplane mode, turning the
power off, etc.).
Somebody nearby may be equipped with electronic medical
equipment such as an implanted cardiac pacemaker or an
implanted cardioverter-defibrillator. Electromagnetic signals
may have harmful effects on the operation of the electronic
medical equipment.
Follow the instructions given by the respective
medical facilities regarding the use of the tablet on
their premises.
Material list
Part Material/Surface treatment
Display side
Reinforced glass/Shatterproof
sheet of surface
Back
PMMA + PC resin/Hard
coating for surface
Sides
PA resin/UV coating for
surface
Surrounding area of main body
ABS resin/UV coating for
surface
miFUR 6IM card VORW6US/Ni plating
microSD Card slot SUS/Ni plating
miFUR 6IM card/microSD
Card slot cover
ABS resin/UV coating for
surface
Gasket of miFUR 6IM card/
microSD Card slot cover
Silicon rubber
IMEI plate PP resin
Power key
ABS resin/UV coating for
surface
Side key
ABS resin/UV coating for
surface
Camera panel
PMMA + PC resin/Hard
coating for surface
Decoration of camera Aluminum
Speaker mesh PET
Metal section of Mobacas/TV
antenna
SUS/NiTi
Mobacas/TV antenna
PA resin/UV coating for
surface
External connector terminal
SUS/Ni plating, Copper alloy/
Gold plating
Surrounding area of external
connector terminal
ABS resin/UV coating for
surface