Operation Manual

Table Of Contents
Safety Precautions
3
Wipe off water remaining in the grooves of each
section by gently putting the product against a dry
and clean cloth etc.
Since water is sometimes left in the grooves of each section, clear
them of water by putting a cloth against their openings and gently
patting them.
Make sure that there is no more water or foreign objects remaining
in them.
4
Lay out a dry cloth etc. beneath and leave the
product on the cloth at room temperature for
approximately 2 to 3 hours to dry it.
Water, if any, remaining in the product may ooze up after wiping off.
Do not wipe off water remaining in the grooves directly by a
cotton swab etc.
Precautions to be taken after water draining
Do not use the product with water drops still left on it.
Doing so may cause call disruption or cause clothes or bags to get wet.
Doing so may cause the external connection jack, etc. to short-
circuit, causing fire or malfunction.
Doing so in a cold region may cause a fault due to water drops
freezing.
28