Operation Manual
Table Of Contents
- Preface
- List of Packaged Items
- Operating Instructions
- When Using the Product
- Cell Phone Etiquette
- Illustrations and Descriptions in This Manual
- Contents
- Safety Precautions
- Basic Operations
- Character Input
- Phone
- Address Book
- LINE
- Internet
- Camera
- 1Seg
- Settings
- Appendix
- Introduction of Peripheral Devices
- Using an Earphone Microphone with Switch/Earphone Microphone/Earphone
- Troubleshooting
- Updating Software
- Remotely Locking the Product with Anshin Lock Service
- Using Keitai Sagasete Anshin (Keitai Search) Service
- After-Sales Service
- SIM-Unlocking the Product
- Main Specifications
- Specific Absorption Rate (SAR) of Cell Phones
- CE Declaration of Conformity
- FCC Notice
- Export Administration Regulations
- Intellectual Property Rights
Basic Operations
v
Shutter/Manner mode key
zq
Volume UP/DOWN key
Adjust the volume.
Hold down
z
when the product is folded to turn on the mobile light.
Speaker
Ringtones, alarms, etc. sound from here.
Infrared port
Transfer data by infrared communication.
Camera lens
Mobile light
au Nano IC Card 04 tray/slot
microSD memory card slot
Internal antennas, Wi-Fi
®
/Bluetooth
®
antenna and TV antenna
◎ Antennas are built into the product. Do not cover with hand
during calls or data communication, or place stickers over
antennas. Doing so may affect call/communication quality.
Earpiece (receiver), mouthpiece (microphone), speaker, air vent
◎ Covering earpiece (receiver), mouthpiece (microphone), speaker,
or air vent with stickers, fingers, etc. may hinder product
perfor
mance.
About IMEI
◎ IMEI (international mobile station equipment identity) is a unique
identifying code assigned to each device. The product’s IMEI
can be found on the sticker visible in the battery compartment.
◎ As the IMEI is required information for requesting repairs or
after-sales service, do not remove the sticker with the IMEI
printed on it.
Using Touch Cruiser EX
Use your fingers in the touch area to operate in the same way as a
touchpad (Touch Cruiser EX). Activating a function/application
supporting Touch Cruiser EX enables Touch Cruiser EX and allows the
on-screen pointer to be operated.
1
Activate function/application supporting Touch
Cruiser EX.
Touch Cruiser EX is enabled and “ ” (pointer) is displayed.
•
If an operation description for Touch Cruiser EX is displayed,
press
k
. Checkmark “Don't show again” and press
k
to no
longer display the operation description when next activating
Touch Cruiser EX.
•
Hold down
m
to toggle Touch Cruiser EX on/off. If a function/
application is exited while Touch Cruiser EX is disabled,
reactivating a Touch Cruiser-capable function/application does
not enable Touch Cruiser EX.
•
Ending a function/application supporting Touch Cruiser EX
disables Touch Cruiser EX.
•
Key operation is still possible even when Touch Cruiser EX is
enabled (Except for some applications).
34