Operation Manual

Table Of Contents
Mail
The maximum size of mail text that can be received is 1 MB per
e-mail. If a mail text exceeds that, a message appears at the end
of the received portion indicating that it is truncated.
Received e-mail may not be correctly displayed depending on
the content of the mail.
Inquiring for and Receiving New Mail
You can inquire for and receive new mail if “Auto-receive” is disabled
or there was an e-mail receive failure.
1
When the standby screen is displayed, press
j
.
The folder list is displayed.
2
l
(Receive).
Confirm whether there is new e-mail.
Sending SMS
Send messages (mail text body) with kanji, hiragana, katakana,
alphabet and numbers, symbols, emoji, and facemarks.
1
When the standby screen is displayed, press
j
(hold
down).
Alternatively, to access the screen from the standby screen,
j
j
(SMS).
A thread list grouped by contact is displayed.
2
o
(New Msg).
The SMS create screen is displayed.
When sending to a contact you have exchanged SMS with
before, you can also select the thread to create SMS. In this
instance, proceed to step
4
.
3
Select the recipient entry field Enter the contacts
phone number.
You can also select from [ ] contacts.
Before sending SMS overseas, enter “010” and the “country
code” at the start of the phone number for the recipient.
“010” + “country code” + “phone number for recipient”
* If quoting the cell phone number for the recipient from the address
book, etc., select the recipient entry field again and enter “010” and
the “country code”.
* If the cell phone number for the recipient starts with a “0”, enter the
number without the “0”.
4
Select text field Enter text
k
(Done).
You can enter up to 70 full size/160 half size characters in the
mail text.
5
o
(Send).
Select a sent message
u
(Submenu) [Result Delivery
Report] to check the send result.
67