Operation Manual
Table Of Contents
- Preface
- List of Packaged Items
- Operating Instructions
- When Using the Product
- Cell Phone Etiquette
- Illustrations and Descriptions in This Manual
- Contents
- Safety Precautions
- Basic Operations
- Character Input
- Phone
- Address Book
- LINE
- Internet
- Camera
- 1Seg
- Settings
- Appendix
- Introduction of Peripheral Devices
- Using an Earphone Microphone with Switch/Earphone Microphone/Earphone
- Troubleshooting
- Updating Software
- Remotely Locking the Product with Anshin Lock Service
- Using Keitai Sagasete Anshin (Keitai Search) Service
- After-Sales Service
- SIM-Unlocking the Product
- Main Specifications
- Specific Absorption Rate (SAR) of Cell Phones
- CE Declaration of Conformity
- FCC Notice
- Export Administration Regulations
- Intellectual Property Rights
Appendix
Using an Earphone Microphone with
Switch/Earphone Microphone/
Earphone
You can connect a “Sharp microUSB 3.5mm conversion cable 01 (sold
separately)” to the product and use an earphone.
1
Insert microUSB plug of Sharp microUSB 3.5mm
conversion cable 01 (sold separately) in external
connection jack on product in direction shown,
confirming its orientation.
External
connection jack
Protruding
edges
Sharp microUSB
3.5mm conversion cable 01
(sold separately)
2
Insert earphone microphone with switch, earphone
microphone, or earphone in earphone jack of Sharp
microUSB 3.5mm conversion cable 01 (sold
separately).
Answering a Call with an Earphone Microphone
with Switch
1
Press switch on earphone microphone with switch
while call is arriving.
To end the call, press the switch on the earphone microphone
with switch again.
◎ You may not be able to use this feature depending on the type of
earphone microphone with switch or earphone microphone.
◎ For information on operation-tested 3.5mm-plug earphone
microphone with switch, (commercially available), refer to the
following support page.
http://k-tai.sharp.co.jp/support/a/shf33/
82