User's Manual

Material list
Handset
Part Material/Surface treatment
Surface of
the handset
Main display
side
PC, PMMA resin/Hard coating
Sub display
side
PC, PMMA resin/Hard coating
Side surface of
main display
side
Polyamide resin with glass/UV
coating
Side surface of
sub display
side
Aluminum/Anodizing
Keyboard side UV cured resin
Side surface of
keyboard side
Polyamide resin with glass/UV
coating
Back of
keyboard side
PC+ABS-GF20 resin/UV coatin
g
H
inge
Polyamide resin with glass/UV
coating
Side surface of
hinge section
ABS resin/UV coating
Camera panel PC, PMMA resin/Hard coating
Operation key (including
ornament)
UV cured resin
Side Key PC resin/UV coating
Quick open button
PC resin
Aluminum/Anodizing
Charging terminal SUS/au plating
External connector terminal Copper alloy/Gold plating
Infrared port ABS resin/Hard coating
microSD
Card slot
Metal part STAINLE
SS
Resin section LCP
docomo nano UIM card tray POM
Battery
storage side
Sticker PET
Resin section PC+ABS-GF20 resin
Metal part Nickel silver
Battery
storage
section
Surrounding
area of battery
storage section
PC+ABS-GF20 resin
Screw SUS/Passivation coating
Battery
terminal
Battery terminal
connector
PA4T
Battery terminal Copper alloy/Gold plating
Fitting cover UV cured resin
Back Cover SH76
Part Material/Surface treatment
Back cover PC+ABS-GF20 resin/UV coating
Gasket EPDM/Low friction coating
Battery Pack SH44
Part Material/Surface treatment
Battery pack PC resin
Terminal section Copper alloy/Gold plating
Water wet determination seal High quality paper/PET
Label PET/mat varnish paper
Desktop Holder SH49
Part 材質／表面処理
Desktop holder (top case/
bottom case)
ABS resin/Grain finish
Terminal lever POM resin
Lock lever POM resin
Charging terminal Phosphor bronze/Gold plating
Metal section of connecting
terminal
SUS
Screw
Carbon steel for cold heading/
Trivalent black chromate
Rubber base Foamed urethane
Production lot label Polyester film
Handling precautions
General notes
z
SH-01J is waterproof, however, do not allow water to get
inside the handset and do not allow accessories or optional
parts to get wet.
The battery pack, adapter, desktop holder and docomo nano
UIM card are not waterproof. Do not use in humid or steamy
areas such as bathrooms and avoid exposing to rain and other
forms of moisture. If they are carried close to the skin,
perspiration may cause internal components to corrode and
result in malfunction. Note that if a problem is found to be due to
moisture, the handset and parts are not covered by warranty
and in some cases may be irreparable. Even when repairs are
possible, repair charges will be incurred, since the damage is
not covered by warranty.
z
Clean only with a soft and dry cloth (such as the type used
for eyeglasses).
y
Forceful rubbing of the display with a dry cloth etc. may
scratch its surface.
y
Water drops, dirt, etc. left on the display may cause stains to
form on its surface.
y
Never use chemicals such as alcohol, thinners, benzene or
detergents, as these agents may erase the printing or cause
discoloration.
z
Occasionally clean terminals with a dry cotton swab etc.
Dirty terminals may result in poor connections and loss of power
or insufficient battery charge. Keep the terminals clean with a
dry cotton swab etc.
Be careful with the terminals while cleaning them.
7
Contents/Precautions