User's Manual

 Insert Micro USB plug in correct orientation; otherwise, External Device Port may be damaged.

Check contours and orientation of Micro USB plug, then insert it with tabs (○) facing down.

Extend blades and plug AC Charger into AC outlet

Charging starts and Charging/Notification Lamp illuminates.

 Charging/Notification Lamp goes out when charge is full.

After charging, remove Micro USB plug from External Device Port, then unplug AC

Charger and retract blades

Charging by PC

Connect handset to a PC with Micro USB Cable (SHDDL1; optional accessory).

 Make sure that PC is turned on.

 Charging may not be possible/take a long time depending on connection and PC conditions.

 Never connect Micro USB plug while handset or Micro USB Cable is wet.

Insert Micro USB plug of Micro USB Cable into External Device Port