User's Manual

39/41
『aquos-r_12_Safety Precautions.docx』
 Do not insert a sharp object into Card Slot Cap gap, Earphones-Microphone Jack or External
Connection Jack.
 To maintain water and dust resistance, it is recommended to replace Card Slot Cap every 2 years
regardless of its condition. Customer-requested Card Slot Cap replacement incurs fees and
requires handset submission. For details, contact a SoftBank Shop or SoftBank Customer Support,
General Information.
Washing Handset
Wipe off dirt, sand, beverage, etc., gently with a cloth. Then hold handset approximately 10 cm below
faucet or shower head and wash with low-pressure tap water (6 liters/min. or lower) at room
temperature (5
o
C - 35
o
C). Wash with your hands, taking care not to open Card Slot Cap; do not use
a brush or sponge. Dry handset before use; after drying it well, power on.
 Before washing handset, make sure that Card Slot Cap is closed firmly.
 Do not use a washing machine or ultrasonic cleaner.
 Earphones-Microphone Jack and External Connection Jack tend to accumulate dust, sand, etc.;
rinse and dry them completely before use. Any residue may cause malfunction, burns or fire.
 Do not put a cotton swab, cloth, etc. into Earphones-Microphone Jack or External Connection
Jack; may affect water resistance, causing malfunction.
Drying Handset
After exposing handset to water, be sure to dry Earpiece, Volume Up/Down Key, Power Key, Shutter
Key, Mic, Recorder Mic, External Connection Jack, Speaker, and Earphones-Microphone Jack.
Wipe handset surface with dry cloth
Holding handset firmly by its sides, shake it about 20 times
58