Product Card

30
Before Using the Handset
Mobile light
z
The mobile light may be automatically turned off if you use the
handset for a long time or the handset becomes warm after the
mobile light is turned on. Also, you may not be able to use the
mobile light if the handset is warm.
Microphone
z
When using functions which support the microphone, do not
cover the hole of the microphone.
Earphone/Microphone
z
Depending on the type of the earphone/microphone, it may not
be available.
z The back cover cannot be removed. Removing it forcibly may
cause damage or malfunction.
z The battery is built into the handset and you cannot replace it
by yourself.
IMEI plate
z A plate with the sticker which the IMEI number (International
Mobile Equipment Identifier), CE mark, etc. are printed is
stowed near the nano UIM Card tray slot. The IMEI number
is required when requesting servicing or repairs. Do not pull
out the plate or remove the sticker.
For details on precautions about handling the IMEI plate
(model nameplate), refer to “After-Sales Services” (
☞
P. 213).
z Note that pulling out the IMEI plate forcibly or adding forces on
it may damage to the plate.
z If you accidentally pull out the IMEI plate, slowly return the
IMEI plate while taking care not to insert it too deep.
3 Speaker
g USB Type-C connection jack
●For details on connection to an external device
☞
P. 35
(This drawing is not final)
“Charging”, P. 36 “PC connection”, P. 179 “USB host function”
f Mouthpiece/Microphone
h 3: Power key
j 3: Assistant key
i 1/2: Volume up/down key
c Air vent (decoration of camera)