User guide

36 Voice Call/Video Calling Functions
Note
• The conference call service may not be available on
all networks. Contact your service provider for more
information.
• To end the call with all participants, press [Options]
and select “End All Calls”.
• To reject adding more participants to the current
party, press [Options] and select “Reject”, or you
can send the busy tone by selecting “Busy”.
• You have more options for the conference call after
selecting “Conference All” in step 1:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on
hold, select “Private”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Enter Number”.
2. Enter the number you wish to include in the
conference call and press D to dial.
3. Press [Options] and select “Conference All” to join
the conference call.
If you wish to add other participants, repeat steps 1
to 3.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that
you wish to disconnect from the conference call.
2. Press [Options] and select “End This Call”.
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you
wish to talk to.
2. Press [Options] and select “Private”.
3. Once you have finished the private conversation,
press [Options] and select “Conference All” to
return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].