User Manual

10
OPTICAL DC INLINE INUSB
ARC
LINE IN
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV’s audio
output sockets to the LINE IN socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV’s
or external audio device headphone
socket to the LINE IN socket on the
unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
ARC OPTICAL DC INLINE INUSB
EU
UK
DC IN
Connect to Power
• Before connecting the power adapter,
ensure you have completed all other
connections.
• Risk of product damage! Only use the
supplied mains adaptor as failure to do
this may result in a safety risk and/or
damage to the unit.
• Connect the power adapter to the DC
IN socket of the unit and then into a
mains socket.
Basic Operation
Standby/ON
• When you  rst connect the unit to the
main socket, the unit will be in STAND-
BY mode.
• Press the
button on the remote cont-
rol to switch the main unit ON or OFF.
• Disconnect the main plug from the
main socket if you want to switch the
unit o completely.
 When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the button on the unit
repeatedly or press the
buttons on
the remote control to select the desired
mode.
Adjust the Volume
 Press the + / - buttons on the unit or
on the remote control to adjust the
volume.
 If you wish to turn the sound o , press
the
button on the remote control.
Press the
button again or press the
+/- buttons on the unit or on the remo-
te control to resume normal listening.
Select Equaliser (EQ) Eff ect
While playing, press the EQ button on the
remote control to select between preset
equalisers.
Each time the button is pressed it will
move between the EQ functions as below:
Music (recommended for listening to
all types of music) - white light  ashes 2
seconds.
Movie (recommended for use with