Operation Manual

EN
LINE IN
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV’s audio
output sockets to the LINE IN socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV’s
or external audio device headphone
socket to the LINE IN socket on the
unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
ARC OPTICAL LINE IN UPGRADE
~AC IN
EU
UK
Connect to Power
• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
• Connect the mains cable to the AC
IN Socket of the unit and then into a
mains socket.
Basic Operation
Standby/ON
• When you  rst connect the unit to the
main socket, the unit will be in STAND-
BY mode.
• Press the
button on the remote cont-
rol to switch the main unit ON or OFF.
• Disconnect the main plug from the
main socket if you want to switch the
unit o completely.
 When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the button on the unit
repeatedly or press the LINE, BT
(Bluetooth), OPT/ARC buttons on the
remote control to select the desired
mode.
Adjust the Volume
 Press the + / - buttons on the unit or
on the remote control to adjust the
volume.
 If you wish to turn the sound o ,
press the MUTE button on the remote
control. Press the MUTE button again or
press the +/- buttons on the unit or on
the remote control to resume normal
listening.
Select Equaliser (EQ) E ect
• While playing, press the EQ button on
the remote control to select between
preset equalisers: Movie (recommen-
ded for viewing movies), Music (recom-
mended for listening to music), News
(recommended for listening to News).
LINE IN/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to
the TV or audio device.
2. While in ON mode, press the
button on the unit repeatedly or press
the LINE, OPT/ARC buttons on the
remote control to select the desired
mode.
3. Operate your audio device directly for
playback features.
4. Press the +/– button to adjust the
volume to your desired level.
TIP: