Operating instructions

HT-SB300

2008 December 5

HT-SB300_A6_EN

Preparation for Use

Speaker preparation

Select from three installation methods according to the

preferred position.

Notes:

●

Option 1 or option 2 indicates spike positions based on LCD

TV stand.

●

When attaching the spikes, place the speaker on a cushion

or soft cloth to avoid damage.

Caution:

When using these spikes on glossy or slippery table such as on

glass top, stick foot cushions at the bottom of the spikes to avoid

slippage.

Note:

Option 1 or option 2 foot cushion positions based on LCD TV

stand.

Make sure to unplug the AC power cord before installing

the speaker or changing the position.

Tighten all spikes as shown

Option 2

Option 1

Using spikes

You may choose from the two different spike lengths provided:

25 mm and 30 mm.

Nuts (secured on 30 mm spikes) must be used when installing

either the 25 mm or 30 mm spikes.

The speaker can be leveled by adjusting the spikes and nuts.

Attach foot cushions as shown

Option 1

Option 2

Using foot cushions