Operating instructions

15
HT-SB300
2008 December 5
HT-SB300_A6_EN
Preparation for Use
■ Connecting to a TV
If the TV/monitor has an audio output, connect it to the LINE IN
1 jacks on the rear of the speaker.
To select LINE IN 1 function:
●
On speaker: Press FUNCTION button repeatedly until “L1” is
displayed.
●
On remote control: Press LINE button repeatedly until “L1” is
displayed.
■ Connecting to a TV (with Headphone jack)
If the TV/monitor has headphone jack, connect it to the LINE IN
2 jack on the rear of the speaker.
To select LINE IN 2 function:
●
On speaker: Press FUNCTION button repeatedly until “L2” is
displayed.
●
On remote control: Press LINE button repeatedly until “L2” is
displayed.
Notes:
●
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
●
If the speaker volume is continuously in very high level, the
speaker will mute and recover after 3 seconds.
RIGHT LEFT
LINE IN 1
LINE IN 2
To audio output jacks
RCA cable (supplied)
Speaker
TV
To LINE IN 1
jacks
RIGHT LEFT
HEADPHONE
LINE IN 1LINE IN 2
To HEADPHONE jack
Audio cable (not supplied)
Speaker
TV
To AUDIO
LINE IN 2 jack