Operating instructions

17
HT-SB300
2008 December 5
HT-SB300_A6_EN
Preparation for Use
AC power connection
After checking all the connections have been made correctly,
connect the AC power cord to the AC power input jack, then to
the AC outlet.
■ Using with the AC/DC adaptor
Notes:
● Unplug the AC/DC adaptor from the AC outlet if the speaker
will not be used for a prolonged period of time.
●
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
1
Plug the AC power cord into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC IN jack on
the speaker.
3
Plug the AC power cord into an AC outlet. The STAND-
BY indicator will turn RED when AC power is applied.
The power indicator will turn GREEN when the system
in “ON”.
RIGHT LEFT
LINE IN 1LINE IN 2
2
1
3
AC/DC Adaptor Cable
DC IN jack
(DC 12 V)
AC/DC Adaptor
AC Outlet
(AC 100 - 240 V ~ 50/60 Hz)
AC power cord